透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	3M
	Backing Material	Polyester
	Sub Type	Flap Disc
	Product Type	Abrasive Disc
	Disc Diameter	150mm
	Abrasive Material	Ceramic
	Grit Size	60
	Grade	60
	Quantity Per Package	20Per Pack
	Centre Hole Size	22.23mm
	Standards/Approvals	No
	Series	769F
	Attachment Type	Centre Hole

	選取全部
	品牌 3M
	Backing Material Polyester
	Sub Type Flap Disc
	Product Type Abrasive Disc
	Disc Diameter 150mm
	Abrasive Material Ceramic
	Grit Size 60
	Grade 60
	Quantity Per Package 20Per Pack
	Centre Hole Size 22.23mm
	Standards/Approvals No
	Series 769F
	Attachment Type Centre Hole

Datasheet - 7100239223

豁免

COO (Country of Origin):: PL

3M 769F Series Flap Disc, 150mm Disc Diameter, 60 Grit size - 7100239223

This flap disc is an abrasive finishing product designed for medium to high unit-pressure grinding on metal substrates. It combines a blend of aluminium oxide and a precision-shaped ceramic grain to remove material efficiently while suited to workshop and industrial environments. The construction uses a resin bond with a polyester-backed hub and fibreglass support, providing stable mounting for guarded power tools.

Features & Benefits

• Aluminium oxide and PSG mineral blend for consistent cutting speed
• Resin bond for sustained abrasive life under pressure
• Polyester Y-weight backing for flexible flap conformity
• Fibreglass hub support for improved disc stability
• Available in 60 grit for controlled stock removal and surface preparation

Applications

• Suitable for deburring and blending weld seams on steelwork
• Ideal for surface preparation before coating on stainless components
• Used for finishing nickel/chromium alloy parts in fabrication
• can be used with guarded angle grinders in industrial production

What hole size does it run on grinders with centre-mount spindles?

It uses a 22.23mm centre hole to fit compatible hub-mounted backing plates.

How should it be stored to maintain performance?

Keep in original packaging at 16°C to 26°C and 35 to 50% relative humidity on a first-in, first-out basis.

Which backing type supports the abrasive flaps?

A polyester Y-weight backing carries the flaps, allowing conformity to contours while retaining strength.

Can the fibreglass support plate be altered for custom fitment?

The fibreglass support must not be trimmed as alteration may create a safety risk.

What substrates are appropriate for use?

It is intended for carbon steel, stainless steel and nickel/chromium-based alloys.

3M 769F Ceramic Flap Disc, 150 mm, 60 Grade, 60 Grit 20 Per Pack

訂單超過 $1,300.00 免費送貨