- RS庫存編號:
- 832-0245
- 製造商:
- RS PRO
7 "將在 2 工作日發貨 (本地庫存) "
24 在6 工作日內發貨 (海外庫存)
已增加
單價(不含稅) 個
TWD1,222.00
(不含稅)
TWD1,283.10
(含稅)
單位 | Per unit |
1 - 2 | TWD1,222.00 |
3 - 14 | TWD1,196.00 |
15 + | TWD984.00 |
- RS庫存編號:
- 832-0245
- 製造商:
- RS PRO
法例與合規
- COO (Country of Origin):
- NL
產品詳細資訊
RS 3D Printer Filament PLA 1.75mm 300g
PLA is a tough, easy to use high grade PLA type of filament, ideal for 3D printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Due to a low shrinkage factor PLA will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing
Tougher and less brittle compared to regular PLA
Easy to print at low temperature
Low warping
Biodegradable
Limited smell
Easy to print at low temperature
Low warping
Biodegradable
Limited smell
Once youve purchased your filament its important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend
Note
Due to its low tendency to warp PLA can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60˚C.
PLA can be used on all common desktop FDM or FFF technology 3D printers.
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly
PLA can be used on all common desktop FDM or FFF technology 3D printers.
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly