Chip Programmers & Debuggers

RS offer a range of Chip programmers, adapters, debuggers and UV Erasers for all your programming, software configuration or erasing needs. Our equipment supports a broad range of chips including EPROMs, EEPROMs and flash, GALs and microcontrollers.

Chip programmers

Chip programmers, also known IC Programmers or device programmers are development tools that enable the programming of memory chips. Memory chips are devices that can store a program, data or both. There are two main types of programming tools, the first tool configures the target device directly with a socket on the programmer, the other tool can configure the device on a printed circuit board.

Socket Configuration

Simple and easy to use, socket programming tools enable the device to be inserted into a socket on the upper side of the programmer. The socket is typically a ZIF (Zero Insertion Force) however if the device is not a DIP package plug-in adapter which converts the footprint to another socket is typically used.

Direct Programming

With direct programming, the programming tool is connected to the PCB either with a connector or a special cable. This method is often referred to as on-board programming or in-circuit programming. Device programmers are connected to a PC via a parallel port, USB port or LAN interface. Software programs on the PC transfer the data to the programmer then to the device where the programming process starts.

Chip Debugging

Chip debugging tools are used to support debugging operations. ICE (in-circuit emulation) hardware devices use an in-circuit emulator to debug the software in an embedded system. Emulators load programs into the embedded system. The programs are run and step through slowly identifying the issue. Alternatively, on-chip debugging or JTAG uses an additional debugging interface to live hardware.

UV Erasers

UV erasers are tools used to erase the data that is stored in EPROMs. The tools use strong controlled ultraviolet light exposure to cause ionization within the silicon oxide. This allows the stored charge on the floating gate to dissipate or erase.

Chip Programming adapters

Chip programming adapters are accessories used in conjunction with chip programmers. The adapters are used for prototyping and development. Adapters convert the IC package to allow the programming of other package types including PLCC, DIL and DIP

117 產品顯示為 Chip Programmers & Debuggers

5 6
暫時缺貨
  • RS庫存編號 749-6449
  • 製造零件編號 AC164346
小計(1 件)
TWD17,589.00(不含稅)
有庫存
  • RS庫存編號 772-3154
  • 製造零件編號 ADA-PLCC44-44
小計(1 件)
TWD5,855.00(不含稅)
暫時缺貨
  • RS庫存編號 708-0101
  • 製造零件編號 VNC2 DEBUG MODULE
小計(1 件)
TWD649.00(不含稅)
有庫存
  • RS庫存編號 772-3097
  • 製造零件編號 VERYPRO-299
小計(1 件)
TWD11,853.00(不含稅)
有庫存
  • RS庫存編號 517-2661
  • 製造零件編號 DV007004
小計(1 件)
TWD53,356.00(不含稅)
有庫存
  • RS庫存編號 352-103
  • 製造零件編號 FLASHPRO4
小計(1 件)
TWD5,362.00(不含稅)
有庫存
  • RS庫存編號 101-369
  • 製造零件編號 MIKROE-5162
小計(1 件)
TWD17,724.00(不含稅)
有庫存
  • RS庫存編號 265-1097
  • 製造零件編號 FORTE
小計(1 件)
TWD21,175.00(不含稅)
有庫存
  • RS庫存編號 136-7686
  • 製造零件編號 5.16.02
小計(1 件)
TWD41,344.00(不含稅)
有庫存
  • RS庫存編號 791-6347
  • 製造零件編號 MIKROE-764
小計(1 件)
TWD6,428.00(不含稅)
暫時無法供應
  • RS庫存編號 760-3514
  • 製造零件編號 R0E000200KCT00
小計(1 件)
TWD46,954.00(不含稅)
暫時缺貨
  • RS庫存編號 772-3160
  • 製造零件編號 ADA-PLCC28
小計(1 件)
TWD5,855.00(不含稅)
有庫存
  • RS庫存編號 772-3078
  • 製造零件編號 PRESTO
小計(1 件)
TWD9,779.00(不含稅)
有庫存
  • RS庫存編號 765-0683
  • 製造零件編號 AC162049-2
小計(1 件)
TWD4,751.00(不含稅)
暫時缺貨
  • RS庫存編號 798-4374
  • 製造零件編號 SUPERPRO-6100N
小計(1 件)
TWD102,319.00(不含稅)
有庫存
  • RS庫存編號 180-7529
  • 製造零件編號 AC102015
小計(1 件)
TWD784.00(不含稅)
有庫存
  • RS庫存編號 136-0771
  • 製造零件編號 MIKROE-2002
小計(1 件)
TWD4,903.00(不含稅)
暫時無法供應
  • RS庫存編號 265-9746
  • 製造零件編號 C2000-GANG
小計(1 件)
TWD20,711.00(不含稅)
暫時缺貨
  • RS庫存編號 919-5514
  • 製造零件編號 SUPERPRO-7500
小計(1 盒,共 1 件)
TWD174,456.00(不含稅)
有庫存
  • RS庫存編號 286-4028
  • 製造零件編號 LER-4A
小計(1 件)
TWD2,282.00(不含稅)
每頁顯示的結果