Vishay Through Hole, 6-Pin, TRIAC 6 V, Gate Trigger 22 V
- RS庫存編號:
- 180-7263
- 製造零件編號:
- VO3062
- 製造商:
- Vishay
暫時無法供應
我們不知道此物品是否會到貨，因為製造商正在對其逐步停產。
- RS庫存編號:
- 180-7263
- 製造零件編號:
- VO3062
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Product Type | TRIAC | |
| Rated Average On-State Current Irms | 100mA | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Maximum Gate Trigger Current Igt | 10mA | |
| Repetitive Peak Reverse Voltage VDRM | 6V | |
| Surge Current Rating | 1A | |
| Pin Count | 6 | |
| Maximum Gate Trigger Voltage Vgt | 22V | |
| Configuration | Single | |
| Maximum Holding Current Ih | 250μA | |
| Minimum Operating Temperature | -55°C | |
| Peak Gate Power Dissipation | 300mW | |
| Maximum Operating Temperature | 100°C | |
| Height | 3.5mm | |
| Width | 6.4 mm | |
| Standards/Approvals | No | |
| Length | 9mm | |
| Repetitive Peak Off-State Current | 500nA | |
| Automotive Standard | No | |
| Peak On-State Voltage | 3V | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Product Type TRIAC | ||
Rated Average On-State Current Irms 100mA | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Maximum Gate Trigger Current Igt 10mA | ||
Repetitive Peak Reverse Voltage VDRM 6V | ||
Surge Current Rating 1A | ||
Pin Count 6 | ||
Maximum Gate Trigger Voltage Vgt 22V | ||
Configuration Single | ||
Maximum Holding Current Ih 250μA | ||
Minimum Operating Temperature -55°C | ||
Peak Gate Power Dissipation 300mW | ||
Maximum Operating Temperature 100°C | ||
Height 3.5mm | ||
Width 6.4 mm | ||
Standards/Approvals No | ||
Length 9mm | ||
Repetitive Peak Off-State Current 500nA | ||
Automotive Standard No | ||
Peak On-State Voltage 3V | ||
- COO (Country of Origin):
- MY
The VO3062 and VO3063 triac driver family consists of a GaAs infrared LED optically coupled to a monolithic photosensitive zero crossing triac detector chip. The 600 V blocking voltage permits control of off-line voltages up to 240 VAC, with a safety factor of more than two, and is sufficient for as much as 380V.
1500 V/μs dV/dt minimum
600 V blocking voltage
100 mA on-state current