Nuvotem Talema 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 50 VA, RoHS

RS庫存編號:: 257-5039
製造零件編號:: 91236-P2S2
製造商:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 50 VA, RoHS

可享批量折扣

小計（1 件）*

TWD1,398.00

(不含稅)

TWD1,467.90

訂單超過 $1,300.00 免費送貨

有庫存

加上 75 件從 2026年2月02日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 24	TWD1,398.00
25 +	TWD1,371.00

* 參考價格

RS庫存編號:: 257-5039
製造零件編號:: 91236-P2S2
製造商:: Nuvotem Talema

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Nuvotem Talema
	Product Type	Toroidal Transformer
	Primary Voltage	230 V ac
	Secondary Voltage	2 x 15 V ac
	Number of Outputs	2
	Secondary Current	1.667 A
	Power	50VA
	Weight	650g
	Diameter	80 mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Toroid Centre	Open
	Winding Type	Single Primary
	Maximum Operating Temperature	40°C
	Height	33mm
	Termination Type	Lead
	Standards/Approvals	RoHS

	選取全部
	品牌 Nuvotem Talema
	Product Type Toroidal Transformer
	Primary Voltage 230 V ac
	Secondary Voltage 2 x 15 V ac
	Number of Outputs 2
	Secondary Current 1.667 A
	Power 50VA
	Weight 650g
	Diameter 80 mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Toroid Centre Open
	Winding Type Single Primary
	Maximum Operating Temperature 40°C
	Height 33mm
	Termination Type Lead
	Standards/Approvals RoHS

Open-Style-2x115V-Primary-0050VA_Datasheet

Open Style with Leads, 115/230Vac Primary 15VA to 1000VA

High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field

Very low induced noise (hum)

Very low iron loss

Double insulated primary leads

Supplied with mounting kit

100% electrical and flash tested

Approvals

UL506, EN61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards

EN61558; EN60950; EN60065; BS415

Supplied with

Full mounting kit