Littelfuse, SIDACtor Protection Thyristor 400 V, 500 A 2.2 mA 35 A 4 V
- RS庫存編號:
- 171-9491
- 製造零件編號:
- P0640SCLRP
- 製造商:
- Littelfuse
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 卷，共 2500 件）*
TWD57,000.00
(不含稅)
TWD59,850.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月09日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 2500 - 2500 | TWD22.80 | TWD57,000.00 |
| 5000 + | TWD22.40 | TWD56,000.00 |
* 參考價格
- RS庫存編號:
- 171-9491
- 製造零件編號:
- P0640SCLRP
- 製造商:
- Littelfuse
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Littelfuse | |
| Rated Average On-State Current Irms | 500A | |
| Product Type | SIDACtor Protection Thyristor | |
| Thyristor Type | SIDACtor | |
| Package Type | DO-214AA | |
| Repetitive Peak Reverse Voltage VDRM | 400V | |
| Surge Current Rating | 35A | |
| Mount Type | Surface | |
| Maximum Gate Trigger Current Igt | 2.2mA | |
| Pin Count | 2 | |
| Maximum Gate Trigger Voltage Vgt | 4V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Holding Current Ih | 150mA | |
| Maximum Operating Temperature | 150°C | |
| Series | DO-214AA | |
| Standards/Approvals | GR 1089, TIA-968-B, ITU K.20/21/45, Pb-Free, YD/T 950, YD/T 1082, TIA-968-A, IEC 61000-4-5, YD/T 993, RoHS | |
| Repetitive Peak Off-State Current | 5μA | |
| Automotive Standard | No | |
| Peak On-State Voltage | 4V | |
| 選取全部 | ||
|---|---|---|
品牌 Littelfuse | ||
Rated Average On-State Current Irms 500A | ||
Product Type SIDACtor Protection Thyristor | ||
Thyristor Type SIDACtor | ||
Package Type DO-214AA | ||
Repetitive Peak Reverse Voltage VDRM 400V | ||
Surge Current Rating 35A | ||
Mount Type Surface | ||
Maximum Gate Trigger Current Igt 2.2mA | ||
Pin Count 2 | ||
Maximum Gate Trigger Voltage Vgt 4V | ||
Minimum Operating Temperature -40°C | ||
Maximum Holding Current Ih 150mA | ||
Maximum Operating Temperature 150°C | ||
Series DO-214AA | ||
Standards/Approvals GR 1089, TIA-968-B, ITU K.20/21/45, Pb-Free, YD/T 950, YD/T 1082, TIA-968-A, IEC 61000-4-5, YD/T 993, RoHS | ||
Repetitive Peak Off-State Current 5μA | ||
Automotive Standard No | ||
Peak On-State Voltage 4V | ||
Littelfuse DO-214AA SIDACtor solid state protection devices protect telecommunications equipment such as modems, line cards, fax machines, and other CPE.SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA/EIA-IS-968 (formerly known as FCC Part 68).
All measurements are made at an ambient temperature of 25°C. Ipp applies to -40°C through +85°C temperature range.
Ipp is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor® devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
Vdrm is measured at Idrm.
Vs is measured at 100 V/μs.
Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value.