This Loctite 243 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. It offers high temperature performance and oil tolerance.
Features:
Technology: Acrylic
Chemical Type: Dimethacrylate ester
Fluorescence: Positive under UV light
Components: One component - requires no mixing
Viscosity: Medium, thixotropic
Cure: Anaerobic
Secondary: Cure Activator
Application: Threadlocking
Strength: Medium
How to use Loctite 243?
Clear all surfaces (external and internal) with a cleaning solvent and allow to dry
Cure speed too slow? You need to use appropriate activator and then allow to dry it when needed
Shake it before use
To prevent the Loctite 243 from clogging in the nozzle, avoid tip and metal surface get in contact during application
Store in dry location
How to clean Loctite 243 after using?
It could be removed with a combination of soaking in a solvent and wire brush.
Where can you use Loctite 243?
It works on active metals such as brass or copper as well as on passive substrates ie. stainless steel and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
Benefits
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)