Infineon SRAM, CY7C1021D-10VXI- 1 MB
- RS庫存編號:
- 194-8912
- 製造零件編號:
- CY7C1021D-10VXI
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 194-8912
- 製造零件編號:
- CY7C1021D-10VXI
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | SRAM | |
| Memory Size | 1MB | |
| Organisation | 64K x 16 bit | |
| Number of Words | 64K | |
| Number of Bits per Word | 16 | |
| Maximum Random Access Time | 10ns | |
| Minimum Supply Voltage | 5V | |
| Timing Type | Asynchronous | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Through Hole | |
| Minimum Operating Temperature | -40°C | |
| Package Type | SOJ | |
| Pin Count | 44 | |
| Maximum Operating Temperature | 85°C | |
| Length | 28.7mm | |
| Standards/Approvals | RoHS | |
| Width | 10.29 mm | |
| Height | 3.05mm | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type SRAM | ||
Memory Size 1MB | ||
Organisation 64K x 16 bit | ||
Number of Words 64K | ||
Number of Bits per Word 16 | ||
Maximum Random Access Time 10ns | ||
Minimum Supply Voltage 5V | ||
Timing Type Asynchronous | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Through Hole | ||
Minimum Operating Temperature -40°C | ||
Package Type SOJ | ||
Pin Count 44 | ||
Maximum Operating Temperature 85°C | ||
Length 28.7mm | ||
Standards/Approvals RoHS | ||
Width 10.29 mm | ||
Height 3.05mm | ||
This device has an automatic power down feature that significantly reduces power consumption when deselected. The input and output pins (I/O0 through I/O15) are placed in a high impedance state when the device is deselected (CE HIGH), outputs are disabled (OE HIGH), BHE and BLE are disabled (BHE, BLE HIGH), or during a write operation (CE LOW and WE LOW). Write to the device by taking Chip Enable (CE) and Write Enable (WE) inputs LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is written into the location specified on the address pins (A0 through A15). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is written into the location specified on the address pins (A0 through A15). Read from the device by taking Chip Enable (CE) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins appears on I/O0 to I/O7.