Need to open and close circuits in your equipment without physical contact? Look to this Phoenix Contact relay module. It's an electrical switch that operates on a solid-state principle, using photo-sensitive material to send a signal. As it has no mechanical parts, it's a maintenance-free option that will function reliably for longer. There's also less chance of sparking, which means improved workplace safety. The module features a yellow LED (light-emitting diode) indicator that comes on to indicate the appropriate voltage. This means you can monitor its status easily at a glance, even from a distance. You can mount this unit on a DIN rail, so it's compatible with industry-standard fixtures. Push-in connection means installation is simple and there's no need for tooling.
• Single pole, normally open (SPNO) contact configuration • Dimensions of 6.2 (L) x 80 (H) x 94mm (D) • Maximum load current of 3mA • Maximum load voltage of 30V DC • Maximum turn-on time of 20μs • PLC (programmable logic controller) interface • Operating temperature range of -25°C to +60°C • Contains minimal traces of potentially harmful materials, in compliance with RoHS (Restriction of Hazardous Substances) standards
屬性
值
Maximum Control Voltage
28.8 V dc
Maximum Load Current
3 mA
Mounting Type
DIN Rail
Maximum Load Voltage
30 V dc
Minimum Control Voltage
19.2 V dc
Control Voltage Range
19.2 → 28.8 V dc
Contact Configuration
SPST
Load Voltage Range
5 → 30V dc
Minimum Load Voltage
5 V dc
Terminal Type
Plug In
Number of Poles
1
Depth
94mm
Series
PLC-OPT
Length
6.2mm
Height
80mm
Dimensions
6.2 x 94 x 80mm
Maximum Turn On Time
20 μs
Package Style
Module
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+60°C
Special Features
PLC-INTERFACE for Input Functions with PLC Logic, With Push-In Connection & Plug-In Miniature Solid State Relay