SKF Fluoroelastomer Rotary Shaft Seal, 28.575 mm ID, 44.501 mm OD
- RS庫存編號:
- 588-468
- 製造零件編號:
- 11144
- 製造商:
- SKF
小計（1 包，共 5 件）*
TWD3,703.00
(不含稅)
TWD3,888.15
(含稅)
訂單超過 $1,300.00 免費送貨
庫存資訊目前無法查詢
包 | 每包 | 每單位* |
|---|---|---|
| 1 + | TWD3,703.00 | TWD740.60 |
* 參考價格
- RS庫存編號:
- 588-468
- 製造零件編號:
- 11144
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Rotary Shaft Seal | |
| Material | Fluoroelastomer | |
| Inside Diameter | 28.575 mm | |
| Outside Diameter | 44.501 mm | |
| Thickness | 6.35mm | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 200°C | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Rotary Shaft Seal | ||
Material Fluoroelastomer | ||
Inside Diameter 28.575 mm | ||
Outside Diameter 44.501 mm | ||
Thickness 6.35mm | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 200°C | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. Seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point