Telemecanique Sensors Inductive Block Proximity Sensor, 10 mm Detection, 2-Wire NO, 12 → 48 V dc

查看所有Proximity Sensors

小計（1 件）*

TWD3,317.00

(不含稅)

TWD3,482.85

(含稅)

Add to Basket
選擇或輸入數量
最後的 RS 庫存
  • 最終 3 個，準備發貨
單位
每單位
1 +TWD3,317.00

* 參考價格

RS庫存編號:
221-1716
製造零件編號:
XS7T2DA214LD01
製造商:
Telemecanique Sensors
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Telemecanique Sensors

Sensor Technology

Inductive

Body Style

Block

Detection Range

10 mm

Digital Switching Output Type

2-Wire

Output Function

NO

Connection Type

M12

Supply Voltage

12 → 48 V dc

Length

26mm

IP Rating

IP67

Mounting Type

Flush

Maximum DC Voltage

48V

Minimum Operating Temperature

-25°C

Switching Current

100 mA

Shielding

Unshielded

Depth

26mm

Switching Frequency

100 Hz

Maximum Operating Temperature

+70°C

Maximum Switching Frequency

100Hz

Series

XS

COO (Country of Origin):
ID
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.

Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material Plastic
Type of output signal Discrete
Wiring technique 2-wire
[Sn] nominal sensing
distance
10 mm
Discrete output function 1 NO
Output circuit type DC
Electrical connection Remote male connector M12, 4 pins
Cable length 0.15 m

相關連結