ITT Cannon Male Crimp Circular Connector Contact, Contact Size 16 AWG, Wire Size 16AWG, 18 AWG
- RS庫存編號:
- 273-5348
- 製造零件編號:
- T2P16MC4LT / 192900-0002
- 製造商:
- ITT Cannon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 10 件）*
TWD211.00
(不含稅)
TWD221.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,180 件準備從其他地點送貨
- 加上 2,100 件從 2026年4月28日 起發貨
- 加上 3,000 件從 2026年6月26日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 20 | TWD21.10 | TWD211.00 |
| 30 - 40 | TWD20.70 | TWD207.00 |
| 50 + | TWD20.20 | TWD202.00 |
* 參考價格
- RS庫存編號:
- 273-5348
- 製造零件編號:
- T2P16MC4LT / 192900-0002
- 製造商:
- ITT Cannon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ITT Cannon | |
| Product Type | Circular Connector Contact | |
| Gender | Male | |
| Contact Size | 16 AWG | |
| Current | 13A | |
| Wire Size | 16, 18AWG | |
| Series | T2P | |
| For Use With | Trident & APD 6/7 Way Connectors | |
| Contact Type | Signal | |
| Length | 27.69mm | |
| Contact Plating | Tin | |
| Voltage | 30V | |
| Termination Type | Crimp | |
| Contact Material | Copper Alloy | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Maximum Contact Resistance | 5mΩ | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 ITT Cannon | ||
Product Type Circular Connector Contact | ||
Gender Male | ||
Contact Size 16 AWG | ||
Current 13A | ||
Wire Size 16, 18AWG | ||
Series T2P | ||
For Use With Trident & APD 6/7 Way Connectors | ||
Contact Type Signal | ||
Length 27.69mm | ||
Contact Plating Tin | ||
Voltage 30V | ||
Termination Type Crimp | ||
Contact Material Copper Alloy | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Maximum Contact Resistance 5mΩ | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- DE
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.