STMicroelectronics MEMS Pressure SensorSurface 10 HLGA
- RS庫存編號:
- 110-6550P
- 製造零件編號:
- LPS25HBTR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 1250 件 (以卷裝提供)*
TWD168,750.00
(不含稅)
TWD177,187.50
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 4,562 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1250 - 2498 | TWD135.00 |
| 2500 + | TWD133.00 |
* 參考價格
- RS庫存編號:
- 110-6550P
- 製造零件編號:
- LPS25HBTR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Sensor Type | Absolute Pressure Sensor | |
| Maximum Overload Pressure | 2000kPa | |
| Product Type | MEMS Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | HLGA | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Operating Pressure | 126 kPa | |
| Maximum Supply Voltage | 3.6V | |
| Accuracy | ±0.1 hPa | |
| Maximum Operating Temperature | 105°C | |
| Maximum Output Voltage | 6.7V | |
| Height | 0.8mm | |
| Length | 2mm | |
| Standards/Approvals | No | |
| Series | LPS25HBTR | |
| Minimum Operating Pressure | 26kPa | |
| Minimum Operating Temperature | -30°C | |
| Minimum Output Voltage | 5.7V | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Sensor Type Absolute Pressure Sensor | ||
Maximum Overload Pressure 2000kPa | ||
Product Type MEMS Pressure Sensor | ||
Mount Type Surface | ||
Package Type HLGA | ||
Pin Count 10 | ||
Minimum Supply Voltage 1.7V | ||
Maximum Operating Pressure 126 kPa | ||
Maximum Supply Voltage 3.6V | ||
Accuracy ±0.1 hPa | ||
Maximum Operating Temperature 105°C | ||
Maximum Output Voltage 6.7V | ||
Height 0.8mm | ||
Length 2mm | ||
Standards/Approvals No | ||
Series LPS25HBTR | ||
Minimum Operating Pressure 26kPa | ||
Minimum Operating Temperature -30°C | ||
Minimum Output Voltage 5.7V | ||
Automotive Standard No | ||
MEMS Pressure Sensor: Digital Barometer, STMicroelectronics
This is an ultra-compact absolute piezo-resistive pressure sensor with a high-resolution sensing element and embedded temperature compensation. Digital pressure, temperature data and register control communication is through the SPI and I²C interfaces. The pressure sensors are designed with “ST’s VENSENS technology” allowing the fabrication of pressure sensor on a monolithic silicon chip. This will eliminate wafer-to-wafer bonding and maximise reliability.
These pressure sensors use innovative MEMS (Micro Electro-Mechanical Systems) to provide an extremely high pressure resolution in an ultra-compact and thin package. Pressure sensors are becoming increasingly used in tablets, smartphones, and wearable technology. With them becoming increasingly popular in smartphones, it opens the door to new applications such as weather analysers, health and sports monitors.
• Key technical features –
• Enhanced temperature compensation
• Absolute pressure range from 260 to 1260 hPa
• Lower power consumption, less the 4μA
• Pressure noise lower than 1Pa RMS
• Embedded FIFO