最近搜索

    Pneumatic Pressure Pump 40bar

    Fluke
    RS庫存編號:
    543-853
    製造零件編號:
    700PTP-1
    製造商:
    Fluke
    查看所有Pressure Pumps
    4 現貨庫存,可於3工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD57,664.00

    (不含稅)

    TWD60,547.20

    (含稅)

    單位Per unit
    1 +TWD57,664.00
    RS庫存編號:
    543-853
    製造零件編號:
    700PTP-1
    製造商:
    Fluke

    法例與合規

    不適用

    COO (Country of Origin):
    CN

    產品詳細資訊

    Fluke Pneumatic Test Pump


    The Fluke-700PTP-1 manual pneumatic test pump is capable of supplying pressures of up to 40 bar (600 psi). It is suitable for use with 700 series pressure modules or test gauges, and can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. It can also be used with the 700 series pressure calibrators, which are ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 40 bar (600 psi).
    The pump has ” NPT female connections to both the reference gauge or pressure module, and the unit under test.

    Pump can be easily cleaned without disassembly
    The vernier can be used as a stand-alone low pressure calibration source
    Two pressure ports allowing simultaneous connection
    Adjustable stroke length can be set to limit the pressure per stroke

    Size: 220 x 122 x 89 mm
    Weight: 467 g
    Wetted materials: aluminium, silicon, neoprene, stainless steel, Buna-N

    Supplied with

    1//4 in NPT male to 1//4 in BSP female, 1 meter of hose, 2 x 1//8 in NPT male quick connects, 1//8 NPT female to 1//4 in BSP female & Seal Kit

    FLUKE Pressure Pump, 1/8in NPT Connection, 1m Hose Length - 700 Series - 700PTP-1


    Need a calibration tool to take the strain of tough testing? Put equipment through its paces with this FLUKE pressure pump. Its simple hand actuator works with just a squeeze, letting you get hands-on with your system's pressure control. There's a side-mounted knob that lets you precisely dial pressure up and down to breeze through fine-tuning. Setting the unit up for vacuum applications is fuss-free, thanks to its handy screw-operated function switch. Don't worry about pushing too hard, as the pump's adjustable stroke limit stops pressure increases before they damage your gear.

    • Handles pressures up to 40 bar for use with heavy-duty applications
    • Widely compatible 1/8in NPT for use with standard test gauges and pressure modules
    • Comes with a 1m hose for flexible set-up
    • Springs and seals are accessible without disassembly for easy cleaning

    Applications


    • Device calibration
    • Manufacturing industry
    • Pressure switches

    How do I release pressure from this pump?


    The component vents pressure through the exhaust valve on its adjustment dial. Simply loosen the valve's nut with a spanner to release pressure then tighten it again when you're done.


    Pressure Calibration Pumps & Accessories

    規格

    屬性
    Pump TypePneumatic
    Maximum Pressure40bar
    Pressure Connection1/4 NPT
    Weight467g
    4 現貨庫存,可於3工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    TWD57,664.00

    (不含稅)

    TWD60,547.20

    (含稅)

    單位Per unit
    1 +TWD57,664.00