Festo MS Series Pneumatic Regulator G 1/2 Threaded

RS庫存編號:: 121-5680
Distrelec 貨號:: 301-69-019
製造零件編號:: MS6-LR-1/2-D6-AS
製造商:: Festo

Festo MS Series Pneumatic Regulator G 1/2 Threaded

小計（1 件）*

TWD1,845.00

(不含稅)

TWD1,937.25

訂單超過 $1,300.00 免費送貨

有庫存

21 件準備從其他地點送貨
加上 8 件從 2026年5月25日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,845.00

* 參考價格

RS庫存編號:: 121-5680
Distrelec 貨號:: 301-69-019
製造零件編號:: MS6-LR-1/2-D6-AS
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Product Type	Pneumatic Regulator
	Inlet Connection Type	Threaded
	Inlet Connection Size	G 1/2
	Outlet Connection Type	Threaded
	Series	MS
	Inlet Port Gender	Female
	Maximum Operating Pressure	20 bar
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS

	選取全部
	品牌 Festo
	Product Type Pneumatic Regulator
	Inlet Connection Type Threaded
	Inlet Connection Size G 1/2
	Outlet Connection Type Threaded
	Series MS
	Inlet Port Gender Female
	Maximum Operating Pressure 20 bar
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS

登入下載 CAD 模型

COO (Country of Origin):: HU

Festo Pneumatic Regulator, Die-Cast Aluminium Housing, Size 6 - MS6-LR-1/2-D6-AS

Keep your system's pressure in check with this pneumatic regulator from Festo. When it senses the pressure is at a pre-set level, it immediately cuts off the air supply to hold things steady. Controlling the unit's a breeze thanks to the front-facing rotary knob that lets you easily adjust the setting. You can keep a close eye on the built-in analogue gauge on the front to make sure your system is ticking over as it should.

Features & Benefits

• PE filter traps contaminants to prevent dirt build-up

• Standard nominal flow rate of 6,500L/min for safe use in high-flow pneumatic systems

• Durable die-cast aluminium housing resists corrosion

• Lockable control knob helps prevent tampering

• Lubricated operation possible to minimise the risk of friction and damage caused by wear

Applications

• Water treatment facilities

• Laboratories

• Oil and gas industry

What's the setting range of this regulator?

The pressure setting range is between 0.3 and 7 bar, so you'll find this unit's the right tool for keeping your low-pressure system in line.

Is this regulator sealed?

Yes, this regulator's sealed. It comes with robust NBR rings to prevent leakage.