Testec 8000 Series TT-SI 8110 Oscilloscope Probe, Active, Differential Type, 100MHz, 1:100 / 1:1000dB, BNC Connector
- RS庫存編號:
- 238-7387
- 製造零件編號:
- TT-SI 8110
- 製造商:
- Testec
查看所有Oscilloscope Probes
- RS庫存編號:
- 238-7387
- 製造零件編號:
- TT-SI 8110
- 製造商:
- Testec
法例與合規
- COO (Country of Origin):
- CN
產品詳細資訊
TT-SI 8110
active differential probe
The Testec active differential probe TT-SI 8110 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±2800V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x100 / x1000
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±280V (DC + AC Peak) @ x100
±2800V (DC + AC Peak) @ x1000
Common mode: ±2800V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Rise time: 3,5ns
Attenuation ratio: x100 / x1000
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±280V (DC + AC Peak) @ x100
±2800V (DC + AC Peak) @ x1000
Common mode: ±2800V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
規格
屬性 | 值 |
Probe Type | Active, Differential |
Attenuation | 1:100 / 1:1000dB |
Bandwidth | 100MHz |
Maximum Common Mode Input Voltage | ±2800 (DC+AC Peak)V |
Connector Type | BNC |
Model Number p | TT-SI 8110 |
Number of Probes | 1 |
Safety Category Level | CAT III |
Safety Category Voltage | 600V |
Series | 8000 |
Safety Category | IEC61010-031:2015 |
Rise Time | 5 ns, =3 ns |