最近搜索

    Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 32 V dc, 8 A

    RS庫存編號:
    510-1209
    製造零件編號:
    EM174
    製造商:
    Electromen OY
    Electromen OY
    查看所有Motor Controllers
    20 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD5,411.00

    您付款

    TWD4,870.00

    (不含稅)

    TWD5,113.50

    (含稅)

    單位Per unit
    1 +TWD4,870.00
    RS庫存編號:
    510-1209
    製造零件編號:
    EM174
    製造商:
    Electromen OY
    COO (Country of Origin):
    FI

    產品概覽和技術數據資料表


    法例與合規

    COO (Country of Origin):
    FI

    產品詳細資訊

    PWM DC 8A 12-32Vdc


    EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal can be used to give the speed control value. Rotation direction changes when control input value turns negative or if control input signal is applied to direction input.The unit has reference positive and negative signal for potentiometer use, i.e. the potentiometer can also be used to drive in both directions, the motor stops at potentiometer middle position. Set value range can be scaled to range trim.,During a direction change, the controller waits for motor to stop before driving in opposite direction. This avoids current peaks at direction change. The current limit can be set with a pot or direct voltage signal to protect the motor and mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V supply use.

    Bi-directional
    No brake
    Controlled direction change +/-10v or 0-10v
    Soft start ramp
    Adjustable current limit
    Load compensation (IR comp)

    Electromen - EM-174 8A 12-32VDC PWM DC DRIVE BOARD


    The EM-174A motor driver is designed for DC-motor speed control and is suitable for 12 or 24V supply. Control can be provide by a potentiometer or direct voltage signal and the drive has adjustable load compensation, if required.The drive has positive and negative potentiometer input to allow proportional control in both directions, the value range can be scaled with trim pot.On direction change command, the controller waits for motor to stop before driving in reverse, this avoids high in-rush currents at direction change. The current limit can be set with by trim or with a direct voltage signal to protect the motor and mechanism in jam situations.
    Start-up speed can be adjusted with a acceleration ramp, this is adjusted with on board trim pot.

    Features and Benefits


    High efficiency solid state power stage
    Bidirectional control with smooth direction change
    ±10 V or 0-10V control
    Soft start ramp
    Adjustable current limit
    Load compensation
    High peak loading handling
    DIN rail mountable

    12-24Vdc, 8A continuous, 12A peak
    Speed and direction control
    Adjustable start ramp and current limit
    Symmetrical control ±5V (rev-stop-fwd)
    Compact and DIN rail mountable


    規格

    屬性
    Supply Voltage12 → 32 V dc
    Current Rating8 A
    Voltage Rating40 V
    20 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD5,411.00

    您付款

    TWD4,870.00

    (不含稅)

    TWD5,113.50

    (含稅)

    單位Per unit
    1 +TWD4,870.00