Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, Push Pull, SOT-23, 3-Pin
- RS庫存編號:
- 236-2720P
- 製造零件編號:
- SM351LT
- 製造商:
- Honeywell
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 50 件 (按連續帶提供)*
TWD1,510.00
(不含稅)
TWD1,585.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 8,950 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 50 - 95 | TWD30.20 |
| 100 - 245 | TWD29.60 |
| 250 - 995 | TWD29.00 |
| 1000 + | TWD28.40 |
* 參考價格
- RS庫存編號:
- 236-2720P
- 製造零件編號:
- SM351LT
- 製造商:
- Honeywell
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Honeywell | |
| Sensor Type | Position Sensor | |
| Product Type | Hall Effect Sensor | |
| Technology | Magneto Resistive | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Interface Type | Push Pull | |
| Minimum Supply Voltage | 1.65V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS (Directive 2002/95/EC), ESD Class 2 | |
| Series | Nanopower | |
| Automotive Standard | No | |
| Response Time | 15μs | |
| Supply Current | 1mA | |
| 選取全部 | ||
|---|---|---|
品牌 Honeywell | ||
Sensor Type Position Sensor | ||
Product Type Hall Effect Sensor | ||
Technology Magneto Resistive | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Interface Type Push Pull | ||
Minimum Supply Voltage 1.65V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS (Directive 2002/95/EC), ESD Class 2 | ||
Series Nanopower | ||
Automotive Standard No | ||
Response Time 15μs | ||
Supply Current 1mA | ||
- COO (Country of Origin):
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity