Melexis Surface Position Sensor 4.5 V 5.5 V, SPI, PWM, Analogue, SOIC, 8-Pin
- RS庫存編號:
- 194-2930P
- 製造零件編號:
- MLX90316KDC-BCG-000-RE
- 製造商:
- Melexis
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 750 件 (以卷裝提供)*
TWD120,750.00
(不含稅)
TWD126,787.50
(含稅)
訂單超過 $1,300.00 免費送貨
庫存資訊目前無法查詢
單位 | 每單位 |
|---|---|
| 750 - 1498 | TWD161.00 |
| 1500 + | TWD159.00 |
* 參考價格
- RS庫存編號:
- 194-2930P
- 製造零件編號:
- MLX90316KDC-BCG-000-RE
- 製造商:
- Melexis
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Melexis | |
| Sensor Type | Position Sensor | |
| Product Type | Position Sensor | |
| Technology | Hall Technology | |
| Mount Type | Surface | |
| Interface Type | SPI, PWM, Analogue | |
| Magnetic Type | Hall | |
| Maximum Frequency Response | 1000Hz | |
| Minimum Frequency Response | 100Hz | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SOIC | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 8 | |
| Width | 6.2 mm | |
| Series | MLX90316 | |
| Height | 1.72mm | |
| Standards/Approvals | RoHS Compliant | |
| Length | 4.8mm | |
| Response Time | 4μs | |
| Supply Current | 16mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Melexis | ||
Sensor Type Position Sensor | ||
Product Type Position Sensor | ||
Technology Hall Technology | ||
Mount Type Surface | ||
Interface Type SPI, PWM, Analogue | ||
Magnetic Type Hall | ||
Maximum Frequency Response 1000Hz | ||
Minimum Frequency Response 100Hz | ||
Minimum Supply Voltage 4.5V | ||
Package Type SOIC | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 8 | ||
Width 6.2 mm | ||
Series MLX90316 | ||
Height 1.72mm | ||
Standards/Approvals RoHS Compliant | ||
Length 4.8mm | ||
Response Time 4μs | ||
Supply Current 16mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The MLX90316 is a Triaxis® rotary position sensor IC providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an IMC on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density.
This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.