RS PRO Acrylic Mixer Nozzle, 50ml Bayonet 8 Mixing elements 35mm
- RS庫存編號:
- 239-7788
- 製造商:
- RS PRO
單價 個 (每包:10個)**
TWD20.00
(不含稅)
TWD21.00
(含稅)
870 現貨庫存，可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 | 每包** |
|---|---|---|
| 10 + | TWD20.00 | TWD200.00 |
** 參考價格
- RS庫存編號:
- 239-7788
- 製造商:
- RS PRO
豁免
Adhesive Dispensers
Static mixing nozzles for use with structural adhesive cartridge systems in adhesive dispensing guns (also known as caulking guns). These static mixing nozzles are designed with a helical mixing baffle, which ensures full mixing. The ends of the mixers can be cut back to increase the bead size applied.
The epoxy mixing nozzle has a bell inlet, which fits Nordson EFD valve manifolds and large volume cartridges that port the two different materials directly into the mixer. Easy to clean by removing the mixer and wiping the manifold.
Features and Benefits
Easy to use and can be cut to alter bead size
Easy to clean
Smooth even application
Helical mixing baffle
Mixer Nozzle
Static mixing nozzles for use with structural adhesive cartridge systems in adhesive dispensing guns (also known as caulking guns). These static mixing nozzles are designed with a helical mixing baffle, which ensures full mixing. The ends of the mixers can be cut back to increase the bead size applied.
These mixing nozzles support acrylic and methacrylate adhesives.
These mixing nozzles support acrylic and methacrylate adhesives.
Features and Benefits:
Round mixer profile
Bayonet fitting
Easy to use and can be cut to alter bead size
Easy to clean
Smooth even application
For 50 ml devwekd 530/531 & Loctite 3295 only
Bayonet fitting
Easy to use and can be cut to alter bead size
Easy to clean
Smooth even application
For 50 ml devwekd 530/531 & Loctite 3295 only
Product Application Information
RS PRO mixer nozzles are used by professionals and DIY enthusiasts for a smooth and even application to seal or gap fill with adhesive dispensers such caulking guns. Can be used in many jobs from bathrooms to kitchens.
Used by professionals and DIY enthusiasts for a smooth and even application to seal or gap fill with adhesive dispensers such caulking guns. Can be used in many jobs from bathrooms to kitchens.
FAQs:
Does longer nozzle ensure better mixing of components?
No, every nozzle is designed in an optimal way to ensure correct components mixing. The length of a nozzle always depends on the size of the cartridge. Simply, for the bigger cartridge, a longer nozzle is required. Please, always read epoxy manufacturers recommendations before selecting the correct size of the nozzle to make sure your fluids or liquids are optimally combined.
Can this static mixer nozzle be used more than once?
Yes, nozzles can be washed and re-used as many times as it's needed. However, it is recommended to use carefully cleaned mixer nozzles to make sure liquids or fluids are properly mixed together. Before re-using a nozzle please, make sure it's been cleaned properly and the syringe plunger is not blocked by any obstacles.
No, every nozzle is designed in an optimal way to ensure correct components mixing. The length of a nozzle always depends on the size of the cartridge. Simply, for the bigger cartridge, a longer nozzle is required. Please, always read epoxy manufacturers recommendations before selecting the correct size of the nozzle to make sure your fluids or liquids are optimally combined.
Can this static mixer nozzle be used more than once?
Yes, nozzles can be washed and re-used as many times as it's needed. However, it is recommended to use carefully cleaned mixer nozzles to make sure liquids or fluids are properly mixed together. Before re-using a nozzle please, make sure it's been cleaned properly and the syringe plunger is not blocked by any obstacles.
屬性 | 值 |
|---|---|
| Supported Adhesive Type | Acrylic |
| Supported Cartridge Size | 50ml |
| Supported Cartridge Type | Bayonet |
| Number of Mixing Elements | 8 |
| Length | 35mm |