Microchip, 8bit AVR, Microcontrollers Microcontroller, 20MHz, 8 kB Flash, 44-Pin TQFP

可享批量折扣

小計(1 包,共 5 件)*

TWD334.00

(不含稅)

TWD350.70

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 465 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
5 - 35TWD66.80TWD334.00
40 +TWD65.20TWD326.00

* 參考價格

包裝方式:
RS庫存編號:
199-5367
製造零件編號:
ATMEGA324PB-AN
製造商:
Microchip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Microchip

Family Name

Microcontrollers

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

44

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

8 kB

Maximum Frequency

20MHz

RAM Size

2 kB

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of USART Channels

3

Number of UART Channels

3

Number of I2C Channels

2

Typical Operating Supply Voltage

1.8 → 5.5 V

Number of CAN Channels

0

Instruction Set Architecture

RISC

Maximum Number of Ethernet Channels

0

Maximum Operating Temperature

+85 °C

ADCs

8 x 10 bit

Length

10.1mm

Height

1.05mm

Minimum Operating Temperature

-40 °C

Number of Ethernet Channels

0

Program Memory Type

Flash

Number of ADC Units

1

Number of PCI Channels

0

Number of LIN Channels

0

Width

10.1mm

Dimensions

10.1 x 10.1 x 1.05mm

Pulse Width Modulation

1 (10 Channel)

The Microchip ATmega324PB CMOS 8-bit microcontroller is based on the AVR enhanced RISC architecture. It operates on 1.8V to 5.5V voltage supply. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 32K bytes of In-System Programmable Flash with Read-While-Write capabilities, 1Kbytes EEPROM, 2Kbytes SRAM, 39 general purpose I/O lines, 32 general purpose working registers, five flexible Timer/Counters with compare modes, internal and external interrupts, three serial programmable USART, two byte-oriented 2-wire Serial Interface (I2C), two SPI serial port, a 8-channel 10-bit ADC with optional differential input stage with programmable gain, a programmable Watchdog Timer with internal Oscillator, IEEE std. 1149.1 compliant JTAG test interface, also used for accessing the On-chip debug system and programming, clock failure detection mechanism and six software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, USART, 2-wire Serial Interface, SPI port, and interrupt system to continue functioning. PTC with enabling up to 32 self-cap and 256 mutual-cap sensors. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 20 MIPS throughput at 20MHz

Programming lock for software security

Boundary-scan capabilities according to the JTAG Standard

Extensive on-chip debug support

Programming of flash, EEPROM, fuses, and lock bits through the JTAG Interface

Two 8-bit Timer/Counters with separate prescaler and compare mode

Real time counter with separate oscillator

Two Master/Slave SPI serial interfaces

Programmable watchdog timer with separate on-chip oscillator

Power-on Reset and Programmable Brown-out Detection

Internal 8 MHz Calibrated Oscillator

External and Internal Interrupt Sources

Clock Failure detection mechanism and switch to internal 8 MHz RC oscillator in case of Failure

Individual serial number to represent a unique ID

相關連結