Microchip ATMEGA32U2-AU, 8 bit AVR, ATMEGA32U2 Microcontroller, 16 MHz, 32kB FLASH, 32-Pin TQFP

此圖片僅供參考,請參閲產品詳細資訊及規格

可享批量折扣

小計(1 包,共 2 件)*

TWD278.00

(不含稅)

TWD291.90

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 20 件準備從其他地點送貨
  • 加上 334 件從 2025年12月22日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
2 - 8TWD139.00TWD278.00
10 +TWD135.00TWD270.00

* 參考價格

包裝方式:
RS庫存編號:
131-0287
製造零件編號:
ATMEGA32U2-AU
製造商:
Microchip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Microchip

Product Type

Microcontroller

Series

ATMEGA32U2

Package Type

TQFP

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Interface Type

SPI, USART

Program Memory Size

32kB

Maximum Clock Frequency

16MHz

RAM Size

1kB

Maximum Supply Voltage

5.5V

Number of Programmable I/Os

22

Analogue Comparators

1

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

No

Width

7 mm

Length

7mm

Height

1.05mm

Minimum Supply Voltage

2.7V

Distrelec Product Id

304-37-096

Program Memory Type

FLASH

ADCs

0 bit

Instruction Set Architecture

RISC

Automotive Standard

No

Number of Timers

2

The Microchip ATmega32U2 CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage range. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 32Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 1024 bytes EEPROM, 1024 bytes SRAM 22 general purpose I/O lines, 32 general purpose working registers, two flexible Timer/Counters with compare modes and PWM, one USART, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, debugWIRE interface, also used for accessing the On-chip Debug system and programming and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 16 MIPS Throughput at 16 MHz

In-System Programming by on-chip Boot Program hardware-activated after reset

Programming lock for software security

USB 2.0 Full-speed device module with interrupt on transfer completion

Microcontroller reset on USB Bus Reset without detach

USB Bus Disconnection on Microcontroller Request

One 8-bit Timer/Counters with Separate Prescaler and Compare Mode (two 8-bit PWM channels)

One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Mode (three 8-bit PWM channels)

Master/Slave SPI Serial Interface

Programmable watchdog timer with separate on-chip oscillator

On-chip analog comparator

Interrupt and wake-up on pin change

Power-On Reset and programmable brown-out detection

Internal calibrated oscillator

External and internal Interrupt sources

QFN32 (5x5mm) / TQFP32 package