RS PRO V Output Signal UART, USB IR Temperature Sensor, 1m Cable, 0°C to +1000°C

查看所有Infrared Temperature Sensors
可享批量折扣

小計（1 件）*

TWD5,787.00

(不含稅)

TWD6,076.35

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 8 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD5,787.00
5 +TWD5,613.00

* 參考價格

RS庫存編號:
238-7241
製造商:
RS PRO
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

RS PRO

Sensor Type

V Output Signal

Response Time

250 ms

Accuracy

±1.5°C or ±1.5% of reading

Cable Length

1m

Supply Voltage

24 V dc

Output Type

Alarm, Analogue

Minimum Temperature Sensed

0°C

Light Source

Infrared

Maximum Temperature Sensed

+1000°C

Interface

UART, USB

Housing Material

ABS, Aluminium

Mounting Type

2 x holes, M3 x 0.5 mm thread, depth 7 mm

Diameter

31 mm

IP Rating

IP65

Termination Type

4-Wire Tail

COO (Country of Origin):
GB

RS PRO Infrared Temperature Sensors


Introducing the high-quality RS PRO non-contact IR Thermal Infrared Temperature Sensor. The infrared temperature sensor is extremely small, with a side-entry cable making it ideal for mounting in tight spaces. Featuring configurable parameters for temperature range, alarm output and emissivity settings to give full control of temperature sensing requirements. The infrared temperature sensor measures the average temperature within a spot.

The size of the spot will depend on the distance between the IR sensor and the surface. The sensor's measuring range is very wide, it can be positioned very close to the target surface, to measure a small area, or used at long distances measuring a larger spot. The accuracy of the sensor is not affected by the measurement distance.

Features and Benefits


  • Non-contact IR temperature sensor, ideal for industrial, laboratory or benchtop applications

  • Simultaneous voltage and alarm outputs

  • Built-in backlit display and controls

  • Voltage output: 0 to 5 V dc, 1 to 5 V dc, or 0 to 10 V dc linear output for measured temperature

  • Adjustable temperature range scaling

  • Open collector alarm output with configurable setpoint and hysteresis

  • Measures from 0 ºC to +1000 ºC accurately and consistently

  • Fast response time – a fraction of a second

  • Raspberry Pi connectivity – new application and guide

  • IP65 rated

You May Also Need


  • The mounting bracket RS Stock no: 905-8777 provides fixed or adjustable mounting for aiming the sensor.

  • The air purge collar RS Stock no: 905-8770 helps stop dust and condensation from settling on the lens allowing the sensor to maintain accurate measurements.

Application Information


Materials such as paper, plastics, rubber, wood, tarmac, food, pharmaceuticals and organic matter can all be measured using the RS PRO infrared temperature sensor straight from the box with no need to configure any settings. Painted metal surfaces are also easy to measure.
The small size of the RS PRO infrared temperature sensor makes it ideal for fitting in restricted spaces, such as between a wheel and disc brake. The temperature of the brake disc can be measured at either the rim or hub.

Measure Objects on a Conveyor


Gaps between objects on a conveyor can be ignored with the included Peak and Valley Hold function. The voltage output will ignore low or high readings for a chosen period, so the sensor does not display or output the higher or lower temperature if there is a gap.

Measure Objects in Ovens and Furnaces


The included Reflected Energy Compensation feature provides improved accuracy when measuring objects inside an oven or furnace, with the sensor positioned outside the hot environment and aimed in.

Note

RS Pro Config (Windows) software download link: https://calex.co.uk/download/RSProConfig.zip
Guide to the new Raspberry Pi software: https://calex.co.uk/download/rsp-raspi-guide.pdf
Download the new Raspberry Pi software: https://calex.co.uk/download/rsp-ir-sensor-uart_latest.deb

相關連結