Lightweight construction Designed for one or two fuses
Note
Fuses not included
Warning
Neutral line must not be fused where it is referenced to earth.
Approvals
UL recognised component, CSA certified, VDE, SEMKO
Schaffner Dual Fuse Inlet Filter
The Schaffner IEC inlet filter is a male type, dual fused, panel mount with IEC connector power entry module. It has a voltage rating of 250VAC with 6A high-performance current rating. It is a medical version with a bleed resistor and without Y2 capacitor. The operating frequency of this filter ranges between 0Hz and 400Hz. Schaffner Medical FN92XXB and FN28XB Series IEC Inlet plugs with integral mains filter are designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 (1/4in) receptacles. Low earth leakage current. IEC 950 compliant.
Warning : Neutral line must not be fused where it is referenced to the earth.
Features and Benefits
Lightweight construction Fuse drawer with easy-access Fast-On terminals Maximum leakage current is 2μA Operating temperature ranges between -25°C and 85°C
Applications
Electrical and electronic equipment Medical equipment Household equipment Single-phase and switch-mode power supplies Test and measurement equipment.
Certifications
UL approved CSA Certified VDE SEMKO IP40 rated
Approvals
UL Listed; CSA Certified; VDE; SEMKO
Schaffner Medical FN92XXB and FN28XB Series
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Low earth leakage current. IEC 950 Compliant.
