RS PRO 658mm Synthetic Rubber Hydraulic Hose Assembly, 330 bar Max Pressure

RS庫存編號:: 110-2002
製造商:: RS PRO

RS PRO 658mm Synthetic Rubber Hydraulic Hose Assembly, 330 bar Max Pressure

可享批量折扣

小計（1 件）*

TWD922.00

(不含稅)

TWD968.10

訂單超過 $1,300.00 免費送貨

有庫存

加上 3 件從 2026年4月27日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 4	TWD922.00
5 +	TWD758.00

* 參考價格

RS庫存編號:: 110-2002
製造商:: RS PRO

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	RS PRO
	Product Type	Hydraulic Hose Assembly
	Connection Standard A	G
	Connection Size A	3/8 in
	Connection Gender A	Female
	Overall Length	658mm
	Connection Type A	Threaded
	Inside Diameter	9.53mm
	Connection Size B	3/8 in
	Connection Type B	Threaded
	Connection Gender B	Female
	Connection Standard B	G
	Maximum Operating Pressure	330 bar
	Inner Hose Material	Synthetic Rubber
	Reinforcing Material	Steel
	Cover Material	Synthetic Rubber
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	100°C
	Standards/Approvals	RoHS

	選取全部
	品牌 RS PRO
	Product Type Hydraulic Hose Assembly
	Connection Standard A G
	Connection Size A 3/8 in
	Connection Gender A Female
	Overall Length 658mm
	Connection Type A Threaded
	Inside Diameter 9.53mm
	Connection Size B 3/8 in
	Connection Type B Threaded
	Connection Gender B Female
	Connection Standard B G
	Maximum Operating Pressure 330 bar
	Inner Hose Material Synthetic Rubber
	Reinforcing Material Steel
	Cover Material Synthetic Rubber
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 100°C
	Standards/Approvals RoHS

COO (Country of Origin):: IT

RS PRO Straight Hydraulic Hose Assemblies

Get connected with RS PRO straight hydraulic hose assemblies. Our assemblies consist of synthetic rubber outer covering and high tensile steel wire reinforcing. The hose is flexible, crimped with a female-to-female end fitting ready to connect to other hydraulic components. During application, the hose transmits hydraulic fluid from one location to another in a hydraulic system.

Features and Benefits

Flexible hydraulic hose assemblies

Crimped end fittings

Synthetic rubber outer covering

High tensile steel wire reinforcing

Suitable for mineral oils, lubricating oils, water glycol, water oil emulsion, and hydraulic fluids

Specifications

Connector: Female to Female

Thread size: 1/ 4 in, 3/8in, 1/ 2 in or 3 /4in

Operating Temperature: -40 °C to +100°C

Applications

Applications include, medium-pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water.

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Warning

Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.