Hi-Force, Portable Low Height Hydraulic Cylinder, HLS302 Single Acting 32 t 60 mm
- RS庫存編號:
- 808-034
- 製造零件編號:
- HLS302
- 製造商:
- Hi-Force
小計（1 件）*
TWD21,124.00
(不含稅)
TWD22,180.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 5 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD21,124.00 |
* 參考價格
- RS庫存編號:
- 808-034
- 製造零件編號:
- HLS302
- 製造商:
- Hi-Force
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Hi-Force | |
| Product Type | Low Height Hydraulic Cylinder | |
| Closed Height | 119mm | |
| Stroke Length | 60mm | |
| Extended Height | 179mm | |
| Cylinder Effective Area | 45.6cm² | |
| Oil Capacity | 274cm³ | |
| Maximum Operating Pressure | 10000 psi | |
| Action Type | Single Acting | |
| Cylinder Capacity | 32t | |
| Weight | 7kg | |
| Outside Diameter | 102 mm | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Hi-Force | ||
Product Type Low Height Hydraulic Cylinder | ||
Closed Height 119mm | ||
Stroke Length 60mm | ||
Extended Height 179mm | ||
Cylinder Effective Area 45.6cm² | ||
Oil Capacity 274cm³ | ||
Maximum Operating Pressure 10000 psi | ||
Action Type Single Acting | ||
Cylinder Capacity 32t | ||
Weight 7kg | ||
Outside Diameter 102 mm | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- GB
Low Height Cylinders
Use where collapsed height is a premier requirement in a lifting, levelling or pushing application
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity
Low Height Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Warning
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.