Infineon TLE92464EDXUMA1 MOSFET Gate Driver 4, 1.5 A 36-Pin 5.5 V, DSO
- RS庫存編號:
- 233-4400
- 製造零件編號:
- TLE92464EDXUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD582.00
(不含稅)
TWD611.10
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 286 件從 2026年1月09日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD291.00 | TWD582.00 |
| 10 - 98 | TWD285.50 | TWD571.00 |
| 100 - 248 | TWD278.50 | TWD557.00 |
| 250 - 498 | TWD273.50 | TWD547.00 |
| 500 + | TWD268.50 | TWD537.00 |
* 參考價格
- RS庫存編號:
- 233-4400
- 製造零件編號:
- TLE92464EDXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Solenoid Driver | |
| Output Current | 1.5A | |
| Pin Count | 36 | |
| Package Type | DSO | |
| Driver Type | MOSFET | |
| Number of Outputs | 4 | |
| Minimum Supply Voltage | 4.5V | |
| Number of Drivers | 4 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 2.5mm | |
| Length | 10.3mm | |
| Width | 7.6 mm | |
| Standards/Approvals | No | |
| Mount Type | Surface | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Solenoid Driver | ||
Output Current 1.5A | ||
Pin Count 36 | ||
Package Type DSO | ||
Driver Type MOSFET | ||
Number of Outputs 4 | ||
Minimum Supply Voltage 4.5V | ||
Number of Drivers 4 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 2.5mm | ||
Length 10.3mm | ||
Width 7.6 mm | ||
Standards/Approvals No | ||
Mount Type Surface | ||
Automotive Standard AEC-Q100 | ||
The Infineon TLE92464ED is a flexible, monolithic solenoid driver IC designed for the control of linear solenoids in automatic transmissions, electronic stability control and active suspension applications. The device includes the drive transistor and the current sensing resistor to minimize the number of external components. The device control the load current with less than 1% error. It target current from 0 to 1500mA can be programmed with a resolution of 15 bit. The device supports dither currents up to 1800mA. The dither generator superimposes a triangular or trapezoidal waveform with programmable amplitude, frequency and shape on the programmed current set point. A 32 bit SPI interface is used to control the 4 channels and monitor the status of the diagnostic functions. The SPI communication is secured with an 8 bit CRC and a programmable timeout watchdog.
Two independent current feedback paths
Integrated system clock with clock watchdog
Temperature range -40°C to 175 °C
Excellent immunity to large load supply voltage changes