Pfannenberg PF 42.500 Series Filter Media, 230V, AC, 93 m³/h Filtered, 138 m³/h Unimpeded, IP54, 252 mm, 252 mm x
- RS庫存編號:
- 460-817
- 製造零件編號:
- 11842101055
- 製造商:
- Pfannenberg
不可供應
RS 不再對此產品進貨。
- RS庫存編號:
- 460-817
- 製造零件編號:
- 11842101055
- 製造商:
- Pfannenberg
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Pfannenberg | |
| Product Type | Filter Media | |
| Unimpeded Air Flow | 138m³/h | |
| Noise Level | 43dB | |
| Filtered Air Flow | 93m³/h | |
| Input Current | 120mA | |
| Input Power | 18W | |
| AC or DC Operation | AC | |
| Supply Voltage | 230V | |
| Face Height | 252mm | |
| Face Width | 252mm | |
| Standards/Approvals | EAC, UL, cUL approval, CSA, UKCA | |
| IP Rating | IP54 | |
| Series | PF 42.500 | |
| Bearing Type | Sleeve Bearing | |
| 選取全部 | ||
|---|---|---|
品牌 Pfannenberg | ||
Product Type Filter Media | ||
Unimpeded Air Flow 138m³/h | ||
Noise Level 43dB | ||
Filtered Air Flow 93m³/h | ||
Input Current 120mA | ||
Input Power 18W | ||
AC or DC Operation AC | ||
Supply Voltage 230V | ||
Face Height 252mm | ||
Face Width 252mm | ||
Standards/Approvals EAC, UL, cUL approval, CSA, UKCA | ||
IP Rating IP54 | ||
Series PF 42.500 | ||
Bearing Type Sleeve Bearing | ||
The Pfannenberg 4th generation Filterfans is the culmination of 60 years experience in thermal management. Using filterfans is the most efficient and cost-effective way to remove heat from the electrical cabinet at ambient temperatures below target internal. In order to utilize this cost-effective and energy efficient cooling solution, the shielding effect of the electrical cabinet housing for EM radiation is reduced by the installation cut-out. When the EMC filterfan is used, this shield is securely closed via a metal grid so that EM radiation is attenuated before entry and exit.
High air flow (19 845 m3/h) in small package with low energy consumption
No reduction of air flow
Tried and tested Pfannenberg filterfan technology
Patented tool-free 4-corner fastening system enables installation in seconds and guarantees a secure hold
Environmentally friendly, as there are no metalized plastics
Secure contact service on the installation cut-out edges without beryllium copper gaskets
More secure IP 54 protection by means of foam seal and patented 4-corner fastening system
The filter mat can be replaced easily and in seconds due to the optimized front cover
Flat shape and neutral design make a perfect integration into existing machines possible
Attenuation at 30 MHz about 71 dB
Attenuation at 400 MHz about 57 dB
Approvals: cURus, EAC