Microchip KSZ8851-16MLLI, Ethernet Controller, 3.3 V 100 Mbps BIU, 48-Pin 3.3 V LQFP
- RS庫存編號:
- 177-3997
- 製造零件編號:
- KSZ8851-16MLLI
- 製造商:
- Microchip
此圖片僅供參考,請參閲產品詳細資訊及規格
小計(1 包,共 2 件)*
TWD421.00
(不含稅)
TWD442.04
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年3月30日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 + | TWD210.50 | TWD421.00 |
* 參考價格
- RS庫存編號:
- 177-3997
- 製造零件編號:
- KSZ8851-16MLLI
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Interface Type | BIU | |
| Standard Supported | IEEE 802.3u, IEEE | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Minimum Supply Voltage | 3.3V | |
| Width | 7.1 mm | |
| Length | 7.1mm | |
| Height | 1.6mm | |
| Standards/Approvals | No | |
| Supply Current | 85mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Interface Type BIU | ||
Standard Supported IEEE 802.3u, IEEE | ||
Mount Type Surface | ||
Package Type LQFP | ||
Pin Count 48 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Minimum Supply Voltage 3.3V | ||
Width 7.1 mm | ||
Length 7.1mm | ||
Height 1.6mm | ||
Standards/Approvals No | ||
Supply Current 85mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- US
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.
Integrated MAC and PHY Ethernet Controller
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
相關連結
- Microchip 3.3 V 100 Mbps BIU, 48-Pin 3.3 V LQFP
- WIZnet Inc 3.3 V 100 Mbps SPI, 80-Pin 3.3 V LQFP
- WIZnet Inc W5100 3.3 V 100 Mbps SPI, 80-Pin 3.3 V LQFP
- WIZnet Inc W5300 3.3 V 100 Mbps MII Parallel, 100-Pin 3.3 V LQFP
- Microchip 3.13 V 100 Mbps BIU, 64-Pin 3.46 V LQFP
- Microchip KSZ8463RLI 3.13 V 100 Mbps BIU, 64-Pin 3.46 V LQFP
- Microchip KSZ8463MLI 3.13 V 100 Mbps BIU, 64-Pin 3.46 V LQFP
- Microchip 3.3 V 100 Mbps, 48-Pin 3.3 V LQFP
