Festo EPCS-BS, 8118303 Micro Linear Actuator, 220mm/s, 400 mm
- RS庫存編號:
- 216-6359
- Distrelec 貨號:
- 301-86-951
- 製造零件編號:
- EPCS-BS-60-400-12P-A-ST-M-H1-PLK-AA
- 製造商:
- Festo
小計（1 件）*
TWD43,807.00
(不含稅)
TWD45,997.35
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD43,807.00 |
* 參考價格
- RS庫存編號:
- 216-6359
- Distrelec 貨號:
- 301-86-951
- 製造零件編號:
- EPCS-BS-60-400-12P-A-ST-M-H1-PLK-AA
- 製造商:
- Festo
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Festo | |
| Product Type | Micro Linear Actuator | |
| Stroke Length | 400mm | |
| Maximum Speed | 220mm/s | |
| Series | EPCS-BS | |
| Motor Technology | Stepper Motor | |
| Duty Cycle | 100% | |
| IP Rating | IP40 | |
| Guide Type | Plain Bearing | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS | |
| 選取全部 | ||
|---|---|---|
品牌 Festo | ||
Product Type Micro Linear Actuator | ||
Stroke Length 400mm | ||
Maximum Speed 220mm/s | ||
Series EPCS-BS | ||
Motor Technology Stepper Motor | ||
Duty Cycle 100% | ||
IP Rating IP40 | ||
Guide Type Plain Bearing | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- DE
Festo EPCS-BS Series Micro Linear Actuator, 400mm Stroke Length, IP40 - EPCS-BS-60-400-12P-A-ST-M-H1-PLK-AA, Numeric Part Number:8118303
This micro linear actuator provides controlled linear motion for automation and precision positioning tasks. Designed for continuous operation, it integrates a stepper motor drive and a plain bearing guide to deliver repeatable travel suitable for electrical, mechanical and electronics environments where regulated, programmable movement is required.
Features and Benefits:
• 100% duty cycle enables continuous operation under load
• Stepper motor delivers controlled motion at 220mm/s
• Plain bearing guide reduces friction for smooth travel
• IP40 protection suits indoor industrial installations
• Rated maximum temperature of 50°C supports warm environments
• Stroke length of 400mm provides extended linear travel
• Stepper motor delivers controlled motion at 220mm/s
• Plain bearing guide reduces friction for smooth travel
• IP40 protection suits indoor industrial installations
• Rated maximum temperature of 50°C supports warm environments
• Stroke length of 400mm provides extended linear travel
Applications
• Suitable for pick-and-place mechanisms in assembly lines
• Ideal for laboratory automation requiring precise travel
• Used for actuation in test rigs and inspection stations
• Can be used for positional control in panel-mounted equipment
• Used with control systems for repeatable component indexing
• Ideal for laboratory automation requiring precise travel
• Used for actuation in test rigs and inspection stations
• Can be used for positional control in panel-mounted equipment
• Used with control systems for repeatable component indexing
What supply voltage does it require for motor operation?
The actuator is specified for a 12V stepper configuration which matches common low-voltage control systems.
How does the guide type affect maintenance requirements?
The plain bearing guide minimises complexity and typically requires periodic lubrication rather than frequent part replacement.
Can it be installed in exposed outdoor locations?
With an IP40 rating it is intended for protected indoor use rather than outdoor or wet environments.
What thermal considerations affect placement inside enclosures?
The device is rated to operate up to 50°C, so enclosure ventilation or thermal management should prevent internal temperatures exceeding this limit.
Is it compliant with material restriction regulations?
The unit conforms to RoHS requirements concerning restricted substances.