3M 7000111529 White Double Sided Tape, 0.13 mm Thick, 6N/cm, 12mm x 50 m

查看所有Double Sided Tapes

小計（1 件）*

TWD246.00

(不含稅)

TWD258.30

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 361 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD246.00

* 參考價格

RS庫存編號:
338-356
製造零件編號:
7000111529
製造商:
3M
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

3M

Product Type

Double Sided Tape

Tape Type

Adhesive Tape

Width

12mm

Length

50m

Thickness

0.13mm

Colour

White

Adhesion Strength

6N/cm

Model Number

7000111529

Standards/Approvals

No

豁免

3M Double Sided Tape, 12mm Width, 0.13mm Thickness - 7000111529


This double-sided tape is a thin adhesive tape designed for permanent joining and mounting tasks in industrial settings. It provides a discreet white bondline for applications where a low-profile attachment is required, and is supplied on a 50 m roll for continuous use across production or maintenance operations.

Features & Benefits


• High adhesion of 6 N/cm delivers strong bond strength for assemblies
• 0.13mm thickness enables low-profile joining and minimal gap
• 12mm width facilitates narrow bonding areas and precision placement
• White colour offers a neat finish where appearance matters
• Supplied as a 50 m roll reduces reel changes in production runs

**Applications**


• Suitable for securing sensors and small modules in automation systems
• Ideal for attaching components in electronics assembly processes
• Used for fixing trims and panels in electrical enclosures
• Can be used for temporary fixtures during mechanical prototyping

What handling considerations are there for long rolls in production?


Long rolls should be stored on a clean, dry spool to avoid contamination and unwinding

cut lengths using a Sharp blade for clean edges and consistent application.

How does the tape perform when applied to smooth versus textured substrates?


Adhesion is optimised for contact on smooth surfaces where full-surface contact is achievable, textured substrates may reduce effective bond area and lower holding performance.

What surface preparation improves bond reliability?


Remove dust, oils and particulates with a solvent-compatible wipe and ensure the substrate is dry and at room temperature before applying pressure to establish contact.

How should excess material be trimmed after application in tight assemblies?


Use a precision knife or micro-scissors to trim surplus tape, taking care not to lift adjacent bonded areas

work from the edge towards the centre for control.

相關連結