STMicroelectronics STLD40DPUR QFN Display Driver, 8 Pin, 3 → 5.5 V

可享批量折扣

小計(1 卷,共 3000 件)*

TWD126,900.00

(不含稅)

TWD133,260.00

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 2026年5月27日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每卷*
3000 - 12000TWD42.30TWD126,900.00
15000 +TWD41.00TWD123,000.00

* 參考價格

RS庫存編號:
188-9216
製造零件編號:
STLD40DPUR
製造商:
STMicroelectronics
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

STMicroelectronics

Package Type

QFN

Display Type

LED

Number of Pins

8

Supply Voltage

3 → 5.5 V

Maximum Supply Current

20mA

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+85°C

Mounting Type

Surface Mount

Width

3.15mm

Height

0.95mm

Length

3.15mm

STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSETto the pin RSET.

Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


相關連結