WAGO 264 Series Blue Feed Through Terminal Block, 2.5mm², Single-Level, Cage Clamp Termination, ATEX, IECEx

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

• Available in 3 colours
• Moulded in modified nylon 6.6 (free from halogen)
• Self-extinguishing according to UL94-V2
• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2
• Terminals interlock and are designed to prevent reverse mounting
• 24.5 mm Depth
• Rated at 600 V (UL)
• The green/yellow earth terminal blocks connect directly to the mounting rail

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.

This feed-through terminal block ensures reliable connectivity for conductors ranging from 28 to 12 AWG. Featuring a robust cage clamp termination, it provides secure conductor placement. Its blue housing and single-level mounting are ideal for various applications, and it meets stringent certifications for hazardous areas.

• Handles up to 24A current rating for high-capacity operations
• Rated for voltages up to 600V
• Cage clamp technology ensures secure connections

• Ideal for automation systems
• Suitable for electrical panels requiring compact solutions
• Used in mechanical equipment for secure connections
• Employed in industrial control applications needing safety certifications

Yes, it supports both types of conductors.

Yes, it meets ATEX and IECEx safety standards.

Yes, it operates within -60°C to +105°C.

Yes, it has four connection points.

Yes, it is designed for straightforward installation on DIN-rail mounts.