Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.
Features and Benefits
• Available in 3 colours • Moulded in modified nylon 6.6 (free from halogen) • Self-extinguishing according to UL94-V2 • Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2 • Terminals interlock and are designed to prevent reverse mounting • 24.5 mm Depth • Rated at 600 V (UL) • The green/yellow earth terminal blocks connect directly to the mounting rail
Note
To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block
Approvals
UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.
