RS PRO Jumper Bar for Use with DIN Rail Terminal Blocks
- RS庫存編號:
- 399-105
- 製造商:
- RS PRO
可享批量折扣
單價（不含稅） 個 (每包:5個)**
原價 TWD709.00
您付款
TWD97.80
(不含稅)
TWD102.69
(含稅)
15 "將在 2 工作日發貨 （本地庫存） "*
530 在6 工作日內發貨 (海外庫存)
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 | 每包** |
|---|---|---|
| 5 - 20 | TWD97.80 | TWD489.00 |
| 25 + | TWD80.60 | TWD403.00 |
** 參考價格
- RS庫存編號:
- 399-105
- 製造商:
- RS PRO
Jumper Bars
RS PRO range of jumper bars which is a type of DIN rail terminal accessory for use with terminal blocks. These cross connectors have 10 poles and feature a screw mounting type.
Options include:
815-789 - 10 way jumper bar for terminal, length 4 mm, width 59.3 mm, pitch size 6 mm, cross-section 4 mm², screw threading M2.5
815-795 - 10 way jumper bar for terminal, length 6 mm, width 59.7 mm, pitch size 6 mm, cross-section 4 mm², screw threading M3
815-802 - 10 way jumper bar for terminal, length 6 mm, width 78.9 mm, pitch size 8 mm, cross-section 10 mm², screw threading M 3
399-105 - 10 way jumper bar for terminal, length 4 mm, width 49.9 mm, pitch size 5 mm, cross-section 2.5 mm², screw threading M 2.5
501-792 - Cross connector for 3 tier terminals, length 4 mm, width 49.9 mm, pitch size 5 mm, cross-section 2.5 mm², screw threading M 2.5
RS PRO have a great range of DIN Rail Terminal Accessories and each product has its own unique function when used with DIN rail terminals.
Options include:
815-789 - 10 way jumper bar for terminal, length 4 mm, width 59.3 mm, pitch size 6 mm, cross-section 4 mm², screw threading M2.5
815-795 - 10 way jumper bar for terminal, length 6 mm, width 59.7 mm, pitch size 6 mm, cross-section 4 mm², screw threading M3
815-802 - 10 way jumper bar for terminal, length 6 mm, width 78.9 mm, pitch size 8 mm, cross-section 10 mm², screw threading M 3
399-105 - 10 way jumper bar for terminal, length 4 mm, width 49.9 mm, pitch size 5 mm, cross-section 2.5 mm², screw threading M 2.5
501-792 - Cross connector for 3 tier terminals, length 4 mm, width 49.9 mm, pitch size 5 mm, cross-section 2.5 mm², screw threading M 2.5
RS PRO have a great range of DIN Rail Terminal Accessories and each product has its own unique function when used with DIN rail terminals.
Typical Applications:
Cross connectors are supplied preassembled into a 10 pole part
They can be cut down from 10 poles to the required length
Screws and collars can be removed to skip over terminals
They can be cut down from 10 poles to the required length
Screws and collars can be removed to skip over terminals
Typical Applications:
Jumper bars are used to connect consecutive and non-consecutive terminal blocks that are within the same spacing. They consist of metal tubes which make contact with the internal connector bar in the terminal block.
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Features:
Width: 49.9 mm
Length: 4 mm
Hole height 2.5 mm
Hole diameter 2.8 mm
Pitch size 5 mm
Voltage with partition, max. 800 V
Voltage without partition, max. 400 V
Rated current 20 A
Rated cross section 2.5 mm²
Contamination degree 3
Slotted screw head
Screw threading M2.5
Tightening torque, min. 0.4 Nm, max. 0.8 Nm
Copper material
Tin plated surface
Screw mounting type
Length: 4 mm
Hole height 2.5 mm
Hole diameter 2.8 mm
Pitch size 5 mm
Voltage with partition, max. 800 V
Voltage without partition, max. 400 V
Rated current 20 A
Rated cross section 2.5 mm²
Contamination degree 3
Slotted screw head
Screw threading M2.5
Tightening torque, min. 0.4 Nm, max. 0.8 Nm
Copper material
Tin plated surface
Screw mounting type
屬性 | 值 |
|---|---|
| Accessory Type | Cross Connector |
| Series | Q |
| For Use With | Terminal Block |