- RS庫存編號:
- 163-5152
- 製造零件編號:
- H8PS-8BP
- 製造商:
- Omron
4 現貨庫存,可於6工作日發貨。
單價(不含稅) 個
TWD28,531.00
(不含稅)
TWD29,957.55
(含稅)
單位 | 每單位 |
---|---|
1 + | TWD28,531.00 |
- RS庫存編號:
- 163-5152
- 製造零件編號:
- H8PS-8BP
- 製造商:
- Omron
產品概覽和技術數據資料表
法例與合規
不適用
產品詳細資訊
Omron Digital Counter
The Omron H8PS series digital counter is an LCD display electronic panel mount cam positioner. This counter is logic input, flush mounting and 8 PNP transistor output device. The counter has a voltage rating of 24VDC. It is equipped with useful functions for switching encoder rotation direction, designating the point of origin.
Construction:
The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non-contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and diaphragm. The light/dark pattern is converted to an electrical signal by an array of photodiodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder.
Output circuit
Types of code
Any electronic code is made out of a combination of bits. Each bit is characterised by a low (0) or high (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code.
Single-step code - Only one bit on the parallel output changes state at any given point in time. There is no possibility of any concurrent state changes. Single-step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device
Gray code - This is a Single-step code
Construction:
The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non-contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and diaphragm. The light/dark pattern is converted to an electrical signal by an array of photodiodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder.
Output circuit
Types of code
Any electronic code is made out of a combination of bits. Each bit is characterised by a low (0) or high (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code.
Single-step code - Only one bit on the parallel output changes state at any given point in time. There is no possibility of any concurrent state changes. Single-step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device
Gray code - This is a Single-step code
most absolute encoders use this code.
Multiple-step codes - Natural binary code. This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value, 20 to 2n assigned.
Multiple-step codes - Natural binary code. This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value, 20 to 2n assigned.
Features and Benefits
Easy to adjust using single-function keys
Easy replacement of mechanical cam programmers.
Coder rotation direction change is possible and easy correction at the start point
Backlit liquid crystal display
Front dimension is 96mm x 96mm
Easy replacement of mechanical cam programmers.
Coder rotation direction change is possible and easy correction at the start point
Backlit liquid crystal display
Front dimension is 96mm x 96mm
Applications
Robotic industry
Certifications
UL approved
CSA certified
EMC
CSA certified
EMC
規格
屬性 | 值 |
---|---|
Supply Voltage | 24 V dc |
Count Mode | Hours |
Display Type | LCD |
Input Type | Logic |
Mounting Type | Flush Mount |
Output / Interface | Relay |
Digit Height | 11 mm |
Series | H8PS |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +55°C |
Weight | 300g |