Hengstler 635 Counter, 6 Digit, 10Hz, 230 V ac
- RS庫存編號:
- 165-582
- Distrelec 貨號:
- 303-25-984
- 製造零件編號:
- 0 635 815
- 製造商:
- Hengstler
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
TWD1,385.00
(不含稅)
TWD1,454.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 36 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD1,385.00 |
* 參考價格
- RS庫存編號:
- 165-582
- Distrelec 貨號:
- 303-25-984
- 製造零件編號:
- 0 635 815
- 製造商:
- Hengstler
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Hengstler | |
| Supply Voltage | 230 V ac | |
| Function | Counter | |
| Input Type | Voltage | |
| Connection Type | Screw | |
| Reset Method | No Reset | |
| Number of Digits | 6 | |
| Mounting Type | Panel Mount | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Maximum Count Frequency | 10Hz | |
| Maximum Operating Temperature | +50°C | |
| Minimum Operating Temperature | -10°C | |
| Weight | 20g | |
| Series | 635 | |
| 選取全部 | ||
|---|---|---|
品牌 Hengstler | ||
Supply Voltage 230 V ac | ||
Function Counter | ||
Input Type Voltage | ||
Connection Type Screw | ||
Reset Method No Reset | ||
Number of Digits 6 | ||
Mounting Type Panel Mount | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Maximum Count Frequency 10Hz | ||
Maximum Operating Temperature +50°C | ||
Minimum Operating Temperature -10°C | ||
Weight 20g | ||
Series 635 | ||
- COO (Country of Origin):
- SK
Totalising Counters - 635 Series
High shock stability
6 digits
Non-resettable
Low power consumption
Maximum count frequency 10Hz
Protection to IP40 front of panel
Mounting with locating spring, electrical connection via wiring posts except 230V unit which uses screw connection
Dimensions: H20 x W30mm
6 digits
Non-resettable
Low power consumption
Maximum count frequency 10Hz
Protection to IP40 front of panel
Mounting with locating spring, electrical connection via wiring posts except 230V unit which uses screw connection
Dimensions: H20 x W30mm
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.