Schneider Electric TeSys K CA3KN Contactor, 24 V dc Coil, 10 A, 3NO + 1NC, 690 V ac

Creating seamless integration in all automation applications, compactness ratio and high performance, the TeSys K series is a range of reversing or non-reversing contactors. All 4 pole relays have 10A thermally rated contacts which are suitable for AC or DC control voltages. In addition the series also features low consumption coil versions with built in suppression which are suitable to be used with programmable controllers.

Consistent connection tightness
Power consumption for Vac types 4.5 VA
Power consumption for Vdc types 2.4 W
Current rating 10A Ith
Resistance to vibration & temperature cycling
Din or screw fixing
Ideal for use with GV2-M motor circuit breakers

• BS 5424, IEC 60947, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection
• TC conforming to IEC 60068

Applications - Ideal for Zones sensitive to noise, disturbed mains supplies, industry, building and infrastructure. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems

Relays are positively guided.

Keep a close eye on your electric motor with this control relay from Schneider Electric. It has a utilisation category of AC-15/DC-13 and stops a motor from drawing more current than it can handle to reduce the risk of overheating and malfunctioning. You can put this device to the test in harsh industrial locations, as it resists vibration and shock. A maximum operating rate of 10,000 cycles per hour makes it durable, so you can count on its reliability in demanding systems. This unit is built to optimise control cabinet packing space with compact dimensions of 58 (H) x 45 (W) x 57mm (D).

• Flame-retardant to minimise the risk of a fire spreading
• Insulated for protection against electric shock
• Optional rail or plate mounting to best suit your setup
• IP2X-rated housing reduces the chance of your fingers making contact with live parts

• Industrial manufacturing equipment
• HVAC systems
• Power utilities
• Mining and minerals processing

Yes, the control relay is end-of-life optimised to maximise material recovery. This helps to cut down on the amount of waste sent to landfill.