FTDI Chip Development Kit USB-COM485-PLUS1
- RS庫存編號:
- 687-7746
- Distrelec 貨號:
- 304-00-928
- 製造零件編號:
- USB-COM485-PLUS1
- 製造商:
- FTDI Chip
可享批量折扣
單價 個**
TWD904.00
(不含稅)
TWD949.20
(含稅)
4 現貨庫存，可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD904.00 |
| 5 + | TWD877.00 |
** 參考價格
- RS庫存編號:
- 687-7746
- Distrelec 貨號:
- 304-00-928
- 製造零件編號:
- USB-COM485-PLUS1
- 製造商:
- FTDI Chip
USB-COM-PLUS Modules
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports.
USB-COM232-Plus
The USB-COM232-PLUS1 module is a single channel USB to RS-232 communication device. Utilises the FTDI FT232R
The USB-COM232-PLUS2 module is a single USB interface to two independent RS-232 ports, communication device. Utilises the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM232-PLUS4 module is a single USB interface to four independent RS-232 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-232 level shifters are included, plus Power/TXD/RXD LEDs
The USB-COM232-PLUS2 module is a single USB interface to two independent RS-232 ports, communication device. Utilises the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM232-PLUS4 module is a single USB interface to four independent RS-232 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-232 level shifters are included, plus Power/TXD/RXD LEDs
USB-COM422-Plus
The USB-COM422-PLUS1 module is a single channel USB to RS-422 communication device. Utilises the FTDI FT232R
The USB-COM422-PLUS2 module is a single USB interface to two independent RS-422 ports, communication device. Utilises the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM422-PLUS4 module is a single USB interface to four independent RS-422 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-422 level shifters are included, plus Power/TXD/RXD LEDs
The USB-COM422-PLUS2 module is a single USB interface to two independent RS-422 ports, communication device. Utilises the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM422-PLUS4 module is a single USB interface to four independent RS-422 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-422 level shifters are included, plus Power/TXD/RXD LEDs
USB-COM485-Plus
The USB-COM485-PLUS1 module is a single channel USB to RS-485 communication device. Utilises the FTDI FT232R
The USB-COM485-PLUS2 module is a single USB interface to two independent RS-485 ports, communication device. Utilise the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM485-PLUS4 module is a single USB interface to four independent RS-485 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-485 level shifters are included, plus Power/TXD/RXD LEDs
The USB-COM485-PLUS2 module is a single USB interface to two independent RS-485 ports, communication device. Utilise the FTDI FT2232H (USB 2.0 Hi-Speed device)
The USB-COM485-PLUS4 module is a single USB interface to four independent RS-485 ports, communication device. Utilises the FTDI FT4232H (USB 2.0 Hi-Speed device)
RS-485 level shifters are included, plus Power/TXD/RXD LEDs
The FTDI Chip USB-COM485-Plus1 is a USB to RS485 adapter board. It provides a straight-forward way to convert older devices with as RS485 interface to more up-to-date USB ports. The USB-COM485-Plus1 features RS485 level shifters and the FT232R USB-Serial bridge IC which enables the conversion.
There are 3 LEDs on the USB-COM485-Plus1. A yellow LED indicates when the board is configured and ready. A green LED represents TxD activity when the data is transmitted to the RS485. Finally, there is a red LED which is for the same but with RxD activity.
What connectors are on-board?
1 x 12Mbps USB type B 2.0 male connector
1 x DE-9P male connector
Note: it works with USB 1.1 and 2.0 host and hub ports
What is the maximum data rate?
The maximum RS485 level data rate is 3Mbps.
There are 3 LEDs on the USB-COM485-Plus1. A yellow LED indicates when the board is configured and ready. A green LED represents TxD activity when the data is transmitted to the RS485. Finally, there is a red LED which is for the same but with RxD activity.
What connectors are on-board?
1 x 12Mbps USB type B 2.0 male connector
1 x DE-9P male connector
Note: it works with USB 1.1 and 2.0 host and hub ports
What is the maximum data rate?
The maximum RS485 level data rate is 3Mbps.
屬性 | 值 |
|---|---|
| Kit Classification | Development Kit |