Microchip MCP2561-E/MF, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin DFN

RS庫存編號:: 177-1996
製造零件編號:: MCP2561-E/MF
製造商:: Microchip

Microchip MCP2561-E/MF, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin DFN

可享批量折扣

小計（1 包，共 10 件）*

TWD371.00

(不含稅)

TWD389.60

訂單超過 $1,300.00 免費送貨

最後的 RS 庫存

最終 270 個，準備發貨

單位	每單位	每包*
10 - 20	TWD37.10	TWD371.00
30 - 50	TWD36.30	TWD363.00
60 +	TWD35.70	TWD357.00

* 參考價格

RS庫存編號:: 177-1996
製造零件編號:: MCP2561-E/MF
製造商:: Microchip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Maximum Data Rate	1Mbps
	Number of Transceivers	1
	Standard Supported	ISO 11898-2, ISO 11898-5
	IC Type	CAN Transceiver IC
	Power Down Mode	Normal, Standby
	Maximum Supply Current	70 mA
	Mounting Type	Surface Mount
	Package Type	DFN
	Pin Count	8
	Dimensions	3 x 3 x 0.95mm
	Length	3mm
	Width	3mm
	Height	0.95mm
	Maximum Operating Supply Voltage	5.5 V
	Maximum Operating Temperature	+125 °C
	Minimum Operating Supply Voltage	4.5 V
	Automotive Standard	AEC-Q100
	Minimum Operating Temperature	-40 °C

	選取全部
	品牌 Microchip
	Maximum Data Rate 1Mbps
	Number of Transceivers 1
	Standard Supported ISO 11898-2, ISO 11898-5
	IC Type CAN Transceiver IC
	Power Down Mode Normal, Standby
	Maximum Supply Current 70 mA
	Mounting Type Surface Mount
	Package Type DFN
	Pin Count 8
	Dimensions 3 x 3 x 0.95mm
	Length 3mm
	Width 3mm
	Height 0.95mm
	Maximum Operating Supply Voltage 5.5 V
	Maximum Operating Temperature +125 °C
	Minimum Operating Supply Voltage 4.5 V
	Automotive Standard AEC-Q100
	Minimum Operating Temperature -40 °C

Datasheet

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin

Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are

Microchip MCP2561-E/MF, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin DFN

訂單超過 $1,300.00 免費送貨

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

相關連結