Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC
- RS庫存編號:
- 177-1632
- 製造零件編號:
- MCP2562FD-H/SN
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 管，共 100 件）*
TWD3,620.00
(不含稅)
TWD3,801.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年4月20日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 100 - 400 | TWD36.20 | TWD3,620.00 |
| 500 + | TWD35.50 | TWD3,550.00 |
* 參考價格
- RS庫存編號:
- 177-1632
- 製造零件編號:
- MCP2562FD-H/SN
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Data Rate | 8Mbps | |
| Product Type | CAN Transceiver | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Normal, Standby | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Interface Type | ISO 11898-2, ISO 11898-5 | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Series | MCP2562FD | |
| Height | 1.5mm | |
| Width | 3.9 mm | |
| Length | 4.9mm | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Data Rate 8Mbps | ||
Product Type CAN Transceiver | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Normal, Standby | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Interface Type ISO 11898-2, ISO 11898-5 | ||
Package Type SOIC | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Series MCP2562FD | ||
Height 1.5mm | ||
Width 3.9 mm | ||
Length 4.9mm | ||
Automotive Standard AEC-Q100 | ||
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin
Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin