Microchip ATA6581-GTQW1-VAO, CAN Caps 1 Mbps, 18-Pin VDFN
- RS庫存編號:
- 631-341
- 製造零件編號:
- ATA6581-GTQW1-VAO
- 製造商:
- Microchip
小計（1 卷，共 6000 件）*
TWD325,200.00
(不含稅)
TWD341,460.00
(含稅)
添加 6000 件 件可免費送貨
暫時缺貨
- 從 2026年4月20日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 6000 + | TWD54.20 | TWD325,200.00 |
* 參考價格
- RS庫存編號:
- 631-341
- 製造零件編號:
- ATA6581-GTQW1-VAO
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | CAN Caps | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| Power Down Mode | Yes | |
| Supply Current | 150mA | |
| Package Type | VDFN | |
| Interface Type | CAN | |
| Pin Count | 18 | |
| Maximum Supply Voltage | 40V | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Width | 3 mm | |
| Series | ATA658x | |
| Standards/Approvals | OEM “Hardware Requirements for CAN Interfaces in Automotive Applications” Rev. 1.3, ISO 11898-2:2016, OEM “Requirements for Partial Networking” Rev. 2.2, IEC 61508, AEC-Q100, SAE J2602-2, SAE J2962-2, ISO 26262, SAE J2962-1, SAE J2284-1 to SAE J2284-5, ISO 17987-4 | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type CAN Caps | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
Power Down Mode Yes | ||
Supply Current 150mA | ||
Package Type VDFN | ||
Interface Type CAN | ||
Pin Count 18 | ||
Maximum Supply Voltage 40V | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Width 3 mm | ||
Series ATA658x | ||
Standards/Approvals OEM “Hardware Requirements for CAN Interfaces in Automotive Applications” Rev. 1.3, ISO 11898-2:2016, OEM “Requirements for Partial Networking” Rev. 2.2, IEC 61508, AEC-Q100, SAE J2602-2, SAE J2962-2, ISO 26262, SAE J2962-1, SAE J2284-1 to SAE J2284-5, ISO 17987-4 | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- TH
The Microchip CAN-LIN System Basis Chip is a part of the ATA658x family which offers various combinations of LDOs, CAN Transceiver with or without partial networking and LIN Transceiver(s) in one package. The high speed (up to 5Mbit/s) ISO 11898-2: 2016 compliant CAN transceiver is designed for applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
Differential bus receiver with wide common mode range
Transmit data (TXD) dominant time out function
Autonomous bus biasing in accordance with ISO 11898 2:2016
RXD recessive clamping detection
The CAN transceiver disengages from the bus in over temperature and low power supply mode
Bus pins short circuit protected to GND and VCC