Vishay Bridge Rectifier, 8A, 200V, 4-Pin
- RS庫存編號:
- 903-4737
- 製造零件編號:
- KBU8D-E4/51
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD264.00
(不含稅)
TWD277.20
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 加上 2 件從 2025年12月29日 起發貨
- 最終 1,034 件從 2026年1月05日 起發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 62 | TWD132.00 | TWD264.00 |
| 64 - 124 | TWD128.00 | TWD256.00 |
| 126 + | TWD126.00 | TWD252.00 |
* 參考價格
- RS庫存編號:
- 903-4737
- 製造零件編號:
- KBU8D-E4/51
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Bridge Type | Single Phase | |
| Peak Average Forward Current | 8A | |
| Peak Reverse Repetitive Voltage | 200V | |
| Mounting Type | Through Hole | |
| Package Type | KBU | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 300A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -50 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 10µA | |
| Dimensions | 23.7 x 7.1 x 19.3mm | |
| Length | 23.7mm | |
| Height | 19.3mm | |
| Width | 7.1mm | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Bridge Type Single Phase | ||
Peak Average Forward Current 8A | ||
Peak Reverse Repetitive Voltage 200V | ||
Mounting Type Through Hole | ||
Package Type KBU | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 300A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -50 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 10µA | ||
Dimensions 23.7 x 7.1 x 19.3mm | ||
Length 23.7mm | ||
Height 19.3mm | ||
Width 7.1mm | ||
- COO (Country of Origin):
- CN
SIL PCB Mounting, KBU Series, Vishay Semiconductor
KBU4x, KBU6x and KBU8x series bridge rectifiers in SIL PCB Mounting package from Vishay Semiconductor
Soldering pins for Printed Circuit Board (PCB) through-hole mounting
High surge current capability
Isolating voltage 1500Vrms
Package centre hole for fixing
High surge current capability
Isolating voltage 1500Vrms
Package centre hole for fixing
Approvals
UL E54214
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.