Welding & Brazing

In this section, you'll find a comprehensive choice of welding and brazing equipment and accessories from trusted global brands like Cemont, SIP, GCE and more. We stock arc welders and inverters, MIG welders, hand spot welders and gas blow torches, in addition to a wide range of welding accessories and consumables.

  • Gas torch refills
  • Welding kits
  • Welding and brazing rods
  • Replacement mild/stainless steel wires
  • Replacement CO2/argon gas bottles and tanks

An equally broad selection of welding and brazing safety gear - including all PPE wear, goggles and face shields - can be found under our Safety, Security, ESD and Clean Room products.

What are the main strengths of MIG welding techniques and equipment?

  • MIG welding is an abbreviation of 'metal inert gas', referring to the fact that MIG welders use gas stored in a tank or bottle to help create a protective cloud around the electrical arc (the component that does the actual melting of the metal wire during a welding process).
  • MIG welders are probably the most widely used type of welding machine on today's market, ideal for creating quick and clean joints and seals on metal surfaces ranging from thin gauge metal sheets to heavy steel pipes and structural plates.
  • MIG welding involves the welding wire being continually fed to where it's needed on a spool and is considered a suitable process for working a wide range of metal types including mild steel, stainless steel and aluminium.

There are numerous different techniques available for MIG welding to produce ever-higher quality results and finishes, depending on the type of weld gun being used:

  • Short Circuit Transfer is a type of MIG welding that relies on electricity passing from the welding gun to the metal surface via physical contact from the welding wire, which melts into the joint at fairly low voltages.
  • Globular Transfer welding, conversely, sees the melted wire collecting at the tip of the gun, and then dripping onto the joint - this type of MIG welding requires higher voltages and the use of argon shielding gas.
  • Spray Transfer MIG welding involves the wire is melted and sprayed in a fine mist over the joint, and again requires high voltage with argon gas.

109 產品顯示為 Welding & Brazing

1 6
有庫存
  • RS庫存編號 179-752
小計(1 件)
TWD349.00(不含稅)
有庫存
  • RS庫存編號 141-2953
  • 製造零件編號 53106
小計(1 件)
TWD911.00(不含稅)
有庫存
  • RS庫存編號 179-780
  • 製造零件編號 53204
小計(1 件)
TWD673.00(不含稅)
有庫存
  • RS庫存編號 179-746
  • 製造零件編號 54902RS
小計(1 袋,共 10 件)
TWD299.00(不含稅)
暫時缺貨
  • RS庫存編號 831-242
小計(1 件)
TWD1,111.00(不含稅)
有庫存
  • RS庫存編號 505-7376
  • 製造零件編號 04045 / 04035
小計(1 套)
TWD725.00(不含稅)
有庫存
  • RS庫存編號 467-450
小計(1 件)
TWD778.00(不含稅)
暫時缺貨
  • RS庫存編號 812-4652
  • 製造零件編號 25155RS
小計(1 件)
TWD1,966.00(不含稅)
有庫存
  • RS庫存編號 217-2573
小計(1 件)
TWD1,267.00(不含稅)
暫時無法供應
  • RS庫存編號 505-7360
  • 製造零件編號 04040 / 04035
小計(1 套)
TWD659.00(不含稅)
有庫存
  • RS庫存編號 433-000
  • 製造零件編號 2200JD
小計(1 件)
TWD2,449.00(不含稅)
有庫存
  • RS庫存編號 918-6796
  • 製造零件編號 0768554RS
小計(1 件)
TWD601.00(不含稅)
製造商存貨
  • RS庫存編號 910-7992
  • 製造零件編號 5700537
小計(1 件)
TWD65,586.00(不含稅)
有庫存
  • RS庫存編號 182-8764
小計(1 件)
TWD439.00(不含稅)
有庫存
  • RS庫存編號 623-164
小計(1 件)
TWD1,164.00(不含稅)
有庫存
  • RS庫存編號 918-6803
  • 製造零件編號 0768880RS
小計(1 件)
TWD486.00(不含稅)
有庫存
  • RS庫存編號 141-2956
  • 製造零件編號 WP21104
小計(1 件)
TWD425.00(不含稅)
有庫存
  • RS庫存編號 141-2952
  • 製造零件編號 53104
小計(1 件)
TWD1,031.00(不含稅)
有庫存
  • RS庫存編號 918-6778
  • 製造零件編號 849120RS
小計(1 件)
TWD2,363.00(不含稅)
製造商存貨
  • RS庫存編號 246-3786
  • 製造零件編號 ZANGE FZ02/3
小計(1 件)
TWD39,249.00(不含稅)
每頁顯示的結果