Universal Joints

A universal joint is a mechanical joint used for connecting two shafts or rods whose axes are inclined at an angle to each other. The universal joint compensates for the angular misalignment and allows the shafts freedom of movement in any direction while transmitting rotary motion. The universal joint consists of a pair of hinges or fork shapes yokes oriented at 90° to one another and connected by a cross shaft. These joints are commonly used for connecting line shafts, drive shafts, conveyors and most types of rotating machinery to a prime mover. The universal joint is also known as a universal coupling, U-joint, cardon Joint and hookes joint.

Types of Universal Joint

Single Joint: This has one bending point and can operate at angles of up to 45°. This type of joint can accept up to 25° operating angle misalignment between the two shafts or rods from the central section. This joint is suitable for use in slow speed applications.

Double Joint: This has two bending points and can operate at angles of up to 90°. This type of joint can accept up to 0° to 45° operating angle misalignment between the two shafts or rods from the central section. The advantage of the double universal joint is that it can also compensate for parallel misalignment.

Hub Styles Universal joints are available with four hub styles: Solid: these do not have a machined hole. Bored: have a round, hex or square shaped hole. Splined: these have longitudinal grooves inside the bore. Keyed: these have keying to prevent the universal joint rotating on the shaft. Bearing Types Universal joints are available with two types of bearings: Plain Bearings: these are suitable for low speed applications and can support shock loads, motion reversals, irregular running and high torques. Needle Roller Bearings: these are suitable for high rotational speeds, low torques and wide angles.

The choice of universal joint material depends on the application they are going to be used in: Steel offers the ability to handle greater torque and temperature. Plastic offers rust corrosion and electrical and magnetic insulation. Universal joints can be used in a wide range of applications including drive shafts, automotive propeller shafts, centrifugal fans and centrifugal pumps, belt conveyors, control mechanisms, marine equipment and metal forming machinery.


...
顯示內容 隱藏內容

篩選條件

正在檢視 1 - 20,共 74 項產品
Results per page
Description Price Number of Joints Joint Type Hub Type Bore Hub Outer Diameter Overall Length Maximum Working Angle Peak Torque Material Maximum Speed Minimum Operating Temperature Maximum Operating Temperature
RS庫存編號 689-013
製造零件編號103.13.2224
BrandHuco
TWD544.00
/個 (每包:2個)
單位
Single Plain Bored Hub 6 mm x 1/4 in 14.3mm 46.2mm 45° 0.85Nm Brass 1000rpm -20°C +60°C
RS庫存編號 790-6693
BrandRS PRO
TWD875.00
單位
Single Plain Bored Hub 8mm 16mm 40mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 264-5346
製造零件編號135.17.0000
BrandHuco
TWD1,436.00
單位
Single Plain - - 17mm 58mm 40° 120Nm Steel 1200rpm - -
RS庫存編號 790-6797
BrandRS PRO
TWD2,178.00
單位
Single Needle Roller Bored Hub 18mm 36mm 74mm 45° 200Nm Steel 4000rpm - -
RS庫存編號 790-6781
BrandRS PRO
TWD1,869.00
單位
Single Needle Roller Bored Hub 12mm 25mm 56mm 45° 200Nm Steel 4000rpm - -
RS庫存編號 511-3763
製造零件編號111.13.2222
BrandHuco
TWD682.00
單位
Double Plain Bored Hub 6 x 6mm 14.3mm 62.1mm 90° 0.59Nm Brass 1000rpm -20°C +60°C
RS庫存編號 790-6734
BrandRS PRO
TWD1,004.00
單位
Single Plain Bored Hub 16mm 25mm 74mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 790-6722
BrandRS PRO
TWD873.00
單位
Single Plain Bored Hub 10mm 16mm 56mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 790-6790
BrandRS PRO
TWD2,482.00
單位
Single Needle Roller Bored Hub 20mm 42mm 82mm 45° 200Nm Steel 4000rpm - -
RS庫存編號 790-6784
BrandRS PRO
TWD1,870.00
單位
Single Needle Roller Bored Hub 14mm 28mm 60mm 45° 200Nm Steel 4000rpm - -
RS庫存編號 511-3779
製造零件編號111.16.3232
BrandHuco
TWD675.00
單位
Double Plain Bored Hub 10 x 10mm 17.5mm 89.8mm 90° 1.3Nm Brass 1000rpm -20°C +60°C
RS庫存編號 688-947
製造零件編號103.06.1414
BrandHuco
TWD491.00
/個 (每包:2個)
單位
Single Plain Bored Hub 3 x 3mm 7.1mm 27.2mm 45° 0.11Nm Brass 1000rpm -20°C +60°C
RS庫存編號 689-221
製造零件編號177.08.1818
BrandHuco
TWD2,818.00
單位
Single Plain - 4 x 4mm 8mm 24mm - - Steel 500rpm - -
RS庫存編號 790-6801
BrandRS PRO
TWD4,047.00
單位
Double Needle Roller Bored Hub 12mm 25mm 86mm 90° 200Nm Steel 4000rpm - -
RS庫存編號 790-6725
BrandRS PRO
TWD1,706.00
單位
Single Plain Bored Hub 22mm 45mm 95mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 790-6703
BrandRS PRO
TWD878.00
單位
Single Plain Bored Hub 10mm 22mm 48mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 264-5380
製造零件編號135.26.0000
BrandHuco
TWD1,534.00
單位
Single Plain - - 26mm 86mm 40° 290Nm Steel 1200rpm - -
RS庫存編號 790-6712
BrandRS PRO
TWD1,236.00
單位
Single Plain Bored Hub 18mm 36mm 74mm 45° 600Nm Steel 1000rpm - -
RS庫存編號 688-969
製造零件編號103.06.1616
BrandHuco
TWD457.00
/個 (每包:2個)
單位
Single Plain Bored Hub 1/8 x 1/8in 7.1mm 27.2mm 45° 0.11Nm Brass 1000rpm -20°C +60°C
RS庫存編號 790-6744
BrandRS PRO
TWD1,668.00
單位
Double Plain Bored Hub 8mm 16mm 62mm 90° 600Nm Steel 1000rpm - -