The FTDI Chip FT2233HP/FT2232HP is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 2 independent channels compatible with the FT2232H – Dual Hi-speed USB to multipurpose UART/MPSSE solution.
Supports PD Specification 3.0. 1 x USB PD 3.0 Port supports Dual Role Swap Function Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source. Type-C/PD Physical Layer Protocol. PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM. PD mode configuration through external EEPROM. Options to use external MCU controlling PD policy through I2C interface. Up to 8 Configurable PD GPIO pins support. External MCU support through I2C bus
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.