Eaton 25A British Standard Fuse, A2, 660V ac, 73mm
- RS庫存編號:
- 415-165
- 製造零件編號:
- TIA25
- 製造商:
- Eaton
可享批量折扣
單價 個 (每包:5個)**
TWD384.80
(不含稅)
TWD404.04
(含稅)
320 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 | 每包** |
---|---|---|
5 - 120 | TWD384.80 | TWD1,924.00 |
125 - 495 | TWD369.60 | TWD1,848.00 |
500 + | TWD353.80 | TWD1,769.00 |
** 參考價格
- RS庫存編號:
- 415-165
- 製造零件編號:
- TIA25
- 製造商:
- Eaton
不適用
Red Spot™ Range, Type T HBC
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A
Features and Benefits
Breaking capacity 80kA ac 40kAdc
Rated up to 550Vac/ 250Vdc (Type A1) & 660Vac/ 460Vdc (Type A2)
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
660Vac rated (A1 types 415Vac)
ASTA 20 certified
Rated up to 550Vac/ 250Vdc (Type A1) & 660Vac/ 460Vdc (Type A2)
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
660Vac rated (A1 types 415Vac)
ASTA 20 certified
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A.
Eaton British Standard Fuse, A2, 25 A - Series - TIA25
This 25 A fuse from the Red Spot range in Eaton is ideal for protecting power distribution units, cables and motors. It's a bolted tag fuse (also known as an offset slotted fuse), meaning it's fitted with tags for screwing it into a fuse holder. It can also be bolted directly onto a busbar. This component features low power dissipation so it prevents the circuit from overheating. It's a gG-type fuse, meaning it's suitable for general-purpose use.
• High rupture capacity means it can withstand short-term surges of up to 80 kA at 690 V AC without blowing
• T fuse speed means it's slow-acting, to allow for the initial current inrush needed by motors to start
• A2 fuse size in accordance with British BS 88-2 and international IEC 269-2 standards, with dimensions of 56.4 (height) 22.2 (diameter) and 85.5 mm (length)
• Certified ASTA (Association of Short-circuit Testing Authorities) 20 as a safe and effective fuse
• T fuse speed means it's slow-acting, to allow for the initial current inrush needed by motors to start
• A2 fuse size in accordance with British BS 88-2 and international IEC 269-2 standards, with dimensions of 56.4 (height) 22.2 (diameter) and 85.5 mm (length)
• Certified ASTA (Association of Short-circuit Testing Authorities) 20 as a safe and effective fuse
Where would I use a T-speed fuse?
T-speed fuses are sometimes referred to as anti-surge fuses. Because they can tolerate higher currents for a short period without blowing, you can use them to protect devices such as motors that rely on a short-term power surge to operate.
Note
Eaton formerly known as Bussmann
屬性 | 值 |
---|---|
Current Rating | 25A |
Fuse Size | A2 |
Voltage Rating | 660V ac |
Fuse Standard | BS 88-2, IEC 269-2 |
Fixing Centres | 73mm |
Application Category | gG, gM |
Tag Width | 8.7mm |
Fuse Speed | T |
High Rupture Capacity | Yes |
Overall Length | 85.5mm |
Body Diameter | 22.2mm |
Tag Type | Bolted |
Tag Orientation | Offset |
Body Height | 56.4mm |
Fuse Dimensions | 22.2 (Dia.) x 56.4mm |