Eaton 32A British Standard Fuse, A2, 660V ac, 73mm

As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A

Breaking capacity 80kA ac 40kAdc
Rated up to 550Vac/ 250Vdc (Type A1) & 660Vac/ 460Vdc (Type A2)
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
660Vac rated (A1 types 415Vac)
ASTA 20 certified

As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A.

Opt for this Eaton British Standard fuse to break a circuit when excessive current surges are experienced. It improves workplace safety by minimising heat damage and reducing the risk of electrocution or fire. A high breaking capacity of 80kA (kiloamperes) means the unit is able to safely break a large overcurrent. At the same time it allows for the starting surge of a motor, so is able to discern between serious and harmless power surges. The fuse is easy to mount, thanks to a tag on either end that lets you quickly bolt it down. An air-tight seal ensures no moisture or dirt is able to enter the fuse and negatively affect its good working function. You'll find fuses like this in low-voltage industrial systems and lighting or motor applications.

• Versatile option offers protection to both general-purpose circuits and motor circuits
• Low power loss for improved efficiency in a power system

When a fuse blows, the electrical supply to a particular circuit is immediately cut off to limit the risk of damage to electrical wiring. After it's blown, you can safely replace the fuse without the risk of electrocution.

Eaton formerly known as Bussmann