Eaton 6A British Standard Fuse, A1, 550V ac, 44.5mm
- RS庫存編號:
- 413-282
- 製造零件編號:
- NITD6
- 製造商:
- Eaton
可享批量折扣
單價 個 (每包:5個)**
TWD181.00
(不含稅)
TWD190.05
(含稅)
320 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 | 每包** |
---|---|---|
5 - 120 | TWD181.00 | TWD905.00 |
125 - 495 | TWD176.40 | TWD882.00 |
500 + | TWD176.20 | TWD881.00 |
** 參考價格
- RS庫存編號:
- 413-282
- 製造零件編號:
- NITD6
- 製造商:
- Eaton
不適用
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
Eaton British Standard Fuse, 6A, 550V AC NITD6
Need a general-purpose fuse? This safety-enhancing device from Eaton protects a wide variety of components against overcurrent and short circuits. It safeguards industrial electrical equipment and wiring systems and can be used in conjunction with circuit breakers to reduce the risk of damage, shocks and fires. The fast-acting fuse responds quickly to both high and low current faults by melting to break a circuit. It doesn't release harmful gases or smoke when it blows, so poses no safety risk to people. Its resistor is well sealed inside a cylindrical tube to ensure the fuse's function isn't adversely affected by external environmental conditions.
• Temperature-resistant housing so won't melt nearby cables if it blows
• Insensitive to aging for reduced maintenance and improved longevity
• Quick to install and remove, thanks to its bolted tags that easily slot into a fuse holder
• Insensitive to aging for reduced maintenance and improved longevity
• Quick to install and remove, thanks to its bolted tags that easily slot into a fuse holder
What size is this fuse?
This fuse has a compact size that calls for minimal space on a distribution board. Its dimensions are 55 (L) x 34.6 (H) x 13.8mm (D).
What type of fuse is this?
This is a type F fuse, which means that it's a fast-blow component that quickly melts and breaks a circuit when a fault occurs.
Note
Eaton formerly known as Bussmann
屬性 | 值 |
---|---|
Current Rating | 6A |
Fuse Size | A1 |
Voltage Rating | 550V ac |
Fuse Standard | BS 88, IEC 60269 |
Fixing Centres | 44.5mm |
Application Category | gG |
Tag Width | 11.2mm |
High Rupture Capacity | Yes |
Overall Length | 55mm |
Tag Type | Bolted |
Body Diameter | 13.8mm |
Body Length | 34.6mm |
Tag Orientation | Offset |
Body Height | 34.6mm |
Fuse Dimensions | 13.8 (Dia.) x 55mm |