- RS庫存編號:
- 843-0787
- 製造零件編號:
- 28962
- 製造商:
- Parallax Inc
當前暫無庫存,可於13/05/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個
TWD17,628.00
(不含稅)
TWD18,509.40
(含稅)
單位 | Per unit |
1 - 4 | TWD17,628.00 |
5 + | TWD15,865.00 |
- RS庫存編號:
- 843-0787
- 製造零件編號:
- 28962
- 製造商:
- Parallax Inc
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- US
產品詳細資訊
Arlo Mobile Robot Wheel Kit
The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
Aluminium makes for a tough chassis with an increased payload support.
36-step optical slotted disk with quadrature output on each axle.
Rugged inner-tubed tyres pneumatic tyres
Maximum payload of 27KG
Torque of 85lbs per motor assembly
Wheel rotation with no load: 100rpm
36-step optical slotted disk with quadrature output on each axle.
Rugged inner-tubed tyres pneumatic tyres
Maximum payload of 27KG
Torque of 85lbs per motor assembly
Wheel rotation with no load: 100rpm
Whats in the kit?
Two 12 VDC Motors. (Left & Right)
36 Position quadrature encoder set
Two motor bearing blocks.
Two Main rims
Two rim rings
Two robot drive axles
Two 1/8 x 1 Roll Pink
Two Knobby tires with rubber tube
Two 0.5 ID x 1.125 OD Ball Bearing
Two Hex keys (5mm & 5/32)
All screws and spacers.
36 Position quadrature encoder set
Two motor bearing blocks.
Two Main rims
Two rim rings
Two robot drive axles
Two 1/8 x 1 Roll Pink
Two Knobby tires with rubber tube
Two 0.5 ID x 1.125 OD Ball Bearing
Two Hex keys (5mm & 5/32)
All screws and spacers.
Supplied with
All necessary screws and spacers
The Arlo Robotic System provides the basic hardware to build a mid-size robotics platform ideal for telepresence and autonomous robots. The format is one of a two-wheeled buggy with castors fore and aft. The user can then attach the processor board, motor control boards and sensor/actuator modules to suit their application.
規格
屬性 | 值 |
---|---|
Series | Arlo |
Motion Component Type | Wheel Add-On Kit |